Muffler B16a: RS*R vs Tanabe Medallion ???

EJ6SO4

Known Member
Senior Member
Joined
May 29, 2005
Messages
216
Points
3,016
Location
Kedah, Malaysia
Hi hondarian..need opinion on these 2 muffler..both are s flow for auto...
sound , performance ....
thanks...
 
Last edited:
both are almost the same in terms of performance and sound!!! G-Power medallion widely use in honda car....
 
tanabe racing medallion is farking loud after 3k rpm :X-:
 
go for mugen twin loop but too expensive...iminitation also not bad...i used this before to my b16a auto...good performence n nice sound....
if rs*r n tanabe...i choose tanabe...
 
Reviews on JASMA Approved Pipes (60mm - Inlet):
1) Tanabe Hyper Medallion (Straight Flow) - Good Low to Mid RPM Response - Sound Bassy and droning when cruising above 3K RPM, Screams when VTEC engage
2) Tanabe S-Flow - Good Mid to High RPM Response & Torque - Quiet Bassy Sound, Good Performance & Sound balance- Sound suttle when VTEC engage .
3) RSR Exmag GTII (Straight Flow) - Good Low to Midrange RPM Response & Torque - High pitch Bassy sound - Best Performance but lack sound damping - Best sounding VTEC Engagement
4) Ganador Titan Rouge (Straight Flow) - Good Low to Midrange Response - Low pitch Bassy sound - Best Performance & sound dampening for Straight Flow exhaust. Looks good with Blue exit tip.
 

Similar threads

Posts refresh every 5 minutes




Search

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience