Mircotech MT

[skunkwok]

Currently using this type of model (MTX-8) , just want know what the difference between RPM LIMIT and RPM CUT that got on the handset. Other thing is the boost limit at 25 PSI so if i just off the boost cut , will the ECU will be full function below the 25 PSI ? mean will be the fuel / ignition map will be use as per set after the state boost level ??

Thanks in advance ..

 

[skunkwok]

any one?

 

[vteckiller]

its another word for soft cut and hard cut.
if u off boost cut no boost cut la..
u boost 50psi also no cut la bro.
the fuel and ignition map all depends on the tuning, if u have tuned the car till 25psi then the car will run fine till 25psi but if u have tuned the car to 14psi then u'll have probs..
hope this helps u a bit.

cheers
Joshua
(millennium Motorsports)

Currently using this type of model (MTX-8) , just want know what the difference between RPM LIMIT and RPM CUT that got on the handset. Other thing is the boost limit at 25 PSI so if i just off the boost cut , will the ECU will be full function below the 25 PSI ? mean will be the fuel / ignition map will be use as per set after the state boost level ??

Thanks in advance ..

 

[tuner]

so is i use 45psi map but is i just going 10psi will the ECU will be full function below than 45psi??

 

[vteckiller]

does not mater..the ecu will run.

so is i use 45psi map but is i just going 10psi will the ECU wiif ull be full function below than 45psi??

 

[WBW7827]

CAN i ask few things bout microtech ems..?
1. is there MICROTECH for N/A engine? i heard someone using it for N/A engine..mitsu engine. mine r CA18DE with analog ecu..ecu with red&green lite and a screw to adjust tuning..
2. is it possible to install it to my wiring system??what r the modification to be made for installation..??material & workmanship cost?

 

[vteckiller]

turbo or n/a all same microtech..no special or different ecu
all can use la..
universal

CAN i ask few things bout microtech ems..?
1. is there MICROTECH for N/A engine? i heard someone using it for N/A engine..mitsu engine. mine r CA18DE with analog ecu..ecu with red&green lite and a screw to adjust tuning..
2. is it possible to install it to my wiring system??what r the modification to be made for installation..??material & workmanship cost?

 

[desmondlim]

hyundai coupe want to install turbo & mirco tech

hi , i from johor , who want to sell the 2nd hand turbo vr4 and the mirco tech, please email to me thank you.