Ask JDM Honda Expert Hikaru a Question!!!

JINEIL2EN

Over 10,000 RPM!
Senior Member
Joined
Sep 6, 2004
Messages
15,302
Points
3,213
Location
Island Of Pearl
Special Delicated for JDM Honda Expert-->Hikaru.

Hikaru JDM Honda Civic EK series Library


He will try his best to answer all the question.

Kindly ask him a question. Please, Don't Talk Cock. Make Sure This Topic Will Be A Very Useful Information Database or Library For New Comer.


Thanks To Everyone Who Co-operation. :)
 
my question is, is there any place can get this side skirt & how much...???
http://www.kingmotorsports.com/images/products/mugen_aero_civic_ek_sedan_type_ss_2.jpg
 
delicious hehehehe


hikaru.. i wonder.. if u matched up the original 99 specs bodypart n taiwanese parts.. would there be any gap on any part of the body especially on front end?? i wanna convert to 99 specs but cant afford to buy the whole ori part..


advise me

1. on front side.. which one shud i buy for ori n which one shud i buy for local??

2. would it be any gap if u mixed up the ori n local parts?

3. for the rear end .. what's ur suggestion?? get ori everything or just go for local as ppls wont noticed it if i'm not mistaken

4. how much if quoted everything in single receipt ?? ofr both rear n front ..

5. shop u recommended in KL .. ??


time kasih :rolleyes:
 
Third question is, where is the Air-Cond's Filter located & how to take it out & change a new Filter....
thankz a lot Hikaru.http://www.n305er.com/smilies/girlprey.gif
 
Originally posted by SePaT@Feb 22 2005, 17:40
delicious hehehehe


hikaru.. i wonder.. if u matched up the original 99 specs bodypart n taiwanese parts.. would there be any gap on any part of the body especially on front end?? i wanna convert to 99 specs but cant afford to buy the whole ori part..


advise me

1. on front side.. which one shud i buy for ori n which one shud i buy for local??

2. would it be any gap if u mixed up the ori n local parts?

3. for the rear end .. what's ur suggestion?? get ori everything or just go for local as ppls wont noticed it if i'm not mistaken

4. how much if quoted everything in single receipt ?? ofr both rear n front ..

5. shop u recommended in KL .. ??


time kasih :rolleyes:
hehhh hehhh hehhh sepat i can answer u'r question based on surveying on ori and taiwan made parts....

1. if u wanna change all the ori part it would be costly...the ori CTR grill itself cost RM600 approx...the CTR ori lamp cost RM1300...so if u wanna buy ori item just buy this 2 things okie.

2. if u mix up this 2 things ori with the rest taiwan made shoul be any problems...

3. just buy the ori rear lamp..white/red..RM 760 approx the rest taiwan should be okie..

4. front it cost more than 2K...rear end 1k++

5. GC motorsport/best-1
 
Originally posted by avantasia+Feb 22 2005, 17:55 -->
QUOTE (avantasia @ Feb 22 2005, 17:55 )
--QuoteBegin-SePaT
@Feb 22 2005, 17:40
delicious hehehehe


hikaru.. i wonder.. if u matched up the original 99 specs bodypart n taiwanese parts.. would there be any gap on any part of the body especially on front end?? i wanna convert to 99 specs but cant afford to buy the whole ori part..


advise me

1. on front side.. which one shud i buy for ori n which one shud i buy for local??

2. would it be any gap if u mixed up the ori n local parts?

3. for the rear end .. what's ur suggestion?? get ori everything or just go for local as ppls wont noticed it if i'm not mistaken

4. how much if quoted everything in single receipt ?? ofr both rear n front ..

5. shop u recommended in KL .. ??


time kasih :rolleyes:

hehhh hehhh hehhh sepat i can answer u'r question based on surveying on ori and taiwan made parts....

1. if u wanna change all the ori part it would be costly...the ori CTR grill itself cost RM600 approx...the CTR ori lamp cost RM1300...so if u wanna buy ori item just buy this 2 things okie.

2. if u mix up this 2 things ori with the rest taiwan made shoul be any problems...

3. just buy the ori rear lamp..white/red..RM 760 approx the rest taiwan should be okie..

4. front it cost more than 2K...rear end 1k++

5. GC motorsport/best-1 [/b][/quote]
alahai.. keter hang dah fully converted ker?? aiseyy... i shud see ur car laa .. later when got time we have TT laa.. where do u stay laa pal..??
 
Originally posted by JINEIL2EN@Feb 22 2005, 17:39
my second question is, how to take of rear seat..????
just pull off the lower seat....and u can see the screw to take off the rear wan
 
Originally posted by avantasia+Feb 22 2005, 17:57 -->
QUOTE (avantasia @ Feb 22 2005, 17:57 )
--QuoteBegin-JINEIL2EN
@Feb 22 2005, 17:39
my second question is, how to take of rear seat..????

just pull off the lower seat....and u can see the screw to take off the rear wan [/b][/quote]
Thankz dude. :)
 
Originally posted by JINEIL2EN+Feb 22 2005, 18:01 -->
QUOTE (JINEIL2EN @ Feb 22 2005, 18:01 )
Originally posted by avantasia@Feb 22 2005, 17:57
--QuoteBegin-JINEIL2EN
@Feb 22 2005, 17:39
my second question is, how to take of rear seat..????

just pull off the lower seat....and u can see the screw to take off the rear wan

Thankz dude. :) [/b][/quote]
it's okie dude.....DIY item...

btw the 3rd question regarding air filter for car airconditioning system....i dun think our car have that filter....unless filter drier at the engine bay
 
Originally posted by SePaT+Feb 22 2005, 17:57 -->
QUOTE (SePaT @ Feb 22 2005, 17:57 )
Originally posted by avantasia@Feb 22 2005, 17:55
--QuoteBegin-SePaT
@Feb 22 2005, 17:40
delicious hehehehe


hikaru.. i wonder.. if u matched up the original 99 specs bodypart n taiwanese parts.. would there be any gap on any part of the body especially on front end?? i wanna convert to 99 specs but cant afford to buy the whole ori part..


advise me

1. on front side.. which one shud i buy for ori n which one shud i buy for local??

2. would it be any gap if u mixed up the ori n local parts?

3. for the rear end .. what's ur suggestion?? get ori everything or just go for local as ppls wont noticed it if i'm not mistaken

4. how much if quoted everything in single receipt ?? ofr both rear n front ..

5. shop u recommended in KL .. ??


time kasih :rolleyes:

hehhh hehhh hehhh sepat i can answer u'r question based on surveying on ori and taiwan made parts....

1. if u wanna change all the ori part it would be costly...the ori CTR grill itself cost RM600 approx...the CTR ori lamp cost RM1300...so if u wanna buy ori item just buy this 2 things okie.

2. if u mix up this 2 things ori with the rest taiwan made shoul be any problems...

3. just buy the ori rear lamp..white/red..RM 760 approx the rest taiwan should be okie..

4. front it cost more than 2K...rear end 1k++

5. GC motorsport/best-1

alahai.. keter hang dah fully converted ker?? aiseyy... i shud see ur car laa .. later when got time we have TT laa.. where do u stay laa pal..?? [/b][/quote]
my car still unfinished project...still wait the parts...in considering to take front end ori CTR '99 spec or mix up with taiwan ..... the rear parts oredi '99

btw i'm staying at wangsa maju...u?
 
Originally posted by avantasia+Feb 22 2005, 18:08 -->
QUOTE (avantasia @ Feb 22 2005, 18:08 )
Originally posted by SePaT@Feb 22 2005, 17:57
Originally posted by avantasia@Feb 22 2005, 17:55
--QuoteBegin-SePaT
@Feb 22 2005, 17:40
delicious hehehehe


hikaru.. i wonder.. if u matched up the original 99 specs bodypart n taiwanese parts.. would there be any gap on any part of the body especially on front end?? i wanna convert to 99 specs but cant afford to buy the whole ori part..


advise me

1. on front side.. which one shud i buy for ori n which one shud i buy for local??

2. would it be any gap if u mixed up the ori n local parts?

3. for the rear end .. what's ur suggestion?? get ori everything or just go for local as ppls wont noticed it if i'm not mistaken

4. how much if quoted everything in single receipt ?? ofr both rear n front ..

5. shop u recommended in KL .. ??


time kasih :rolleyes:

hehhh hehhh hehhh sepat i can answer u'r question based on surveying on ori and taiwan made parts....

1. if u wanna change all the ori part it would be costly...the ori CTR grill itself cost RM600 approx...the CTR ori lamp cost RM1300...so if u wanna buy ori item just buy this 2 things okie.

2. if u mix up this 2 things ori with the rest taiwan made shoul be any problems...

3. just buy the ori rear lamp..white/red..RM 760 approx the rest taiwan should be okie..

4. front it cost more than 2K...rear end 1k++

5. GC motorsport/best-1

alahai.. keter hang dah fully converted ker?? aiseyy... i shud see ur car laa .. later when got time we have TT laa.. where do u stay laa pal..??

my car still unfinished project...still wait the parts...in considering to take front end ori CTR '99 spec or mix up with taiwan ..... the rear parts oredi '99

btw i'm staying at wangsa maju...u? [/b][/quote]
ok dude.. slowly.. ur car nice oredi .. i stayed in sri damansara..
 
wow.....please don't pull my leg and I ain't no expert. Me just learnt from the past experience and the urge to know by surfing the web... :lol:
 
Originally posted by JINEIL2EN@Feb 22 2005, 17:34
my question is, is there any place can get this side skirt & how much...???
http://www.kingmotorsports.com/images/products/mugen_aero_civic_ek_sedan_type_ss_2.jpg
If you are talking about the original, I guess www.kingmotorsport.com in US is a good place with a heart breaking price tag as well, USD630 plus shipping. :o Or you can have a Japanese friend to order from Japan then later have it shipped to you. I have not yet seen any replica around but I doubt it will be dubed as I think the OEM Honda sideskirt looks better.... :rolleyes:

Front Under Spoiler Kit Civic 1999-2000 4dr. Unpainted
[71110-XGE-K1S0]
$ 370.00

Side Sill Kit Civic 1999-2000 4dr. Unpainted
[70219-XGE4-K1S0]
$ 630.00

Rear Under Spoiler Kit Civic 1999-2000 4dr. Unpainted
[84111-XGE4-K1S0]
$ 260.00

Rear Wing Kit Civic 1999-2000 4dr. Unpainted
[84112-XGE4-K0S0]
$ 440.00

mugen_aero_civic_ek_sedan_type_ss_3.jpg
 
Originally posted by JINEIL2EN@Feb 22 2005, 17:39
my second question is, how to take of rear seat..????
There are 4 screws between the gap of backrest and seat which you need to remove in order take off your rear seat. It'd be easier to remove your backrest first by locating the screw on each side where your safety belt running from the rear dash panel to the bottom. Remove the 2 screws and your back rest is off by poping it up and there are 3 tabs holding it at the top.

There are another 2 screws you need to remove around the buckle area so that you can remove the bottom seat. What you need is Size 10 spaner and your both hands... :)
 
Originally posted by avantasia+Feb 22 2005, 17:55 -->
QUOTE (avantasia @ Feb 22 2005, 17:55 )
--QuoteBegin-SePaT
@Feb 22 2005, 17:40
delicious hehehehe


hikaru.. i wonder.. if u matched up the original 99 specs bodypart n taiwanese parts.. would there be any gap on any part of the body especially on front end?? i wanna convert to 99 specs but cant afford to buy the whole ori part..


advise me

1. on front side.. which one shud i buy for ori n which one shud i buy for local??

2. would it be any gap if u mixed up the ori n local parts?

3. for the rear end .. what's ur suggestion?? get ori everything or just go for local as ppls wont noticed it if i'm not mistaken

4. how much if quoted everything in single receipt ?? ofr both rear n front ..

5. shop u recommended in KL .. ??


time kasih :rolleyes:

hehhh hehhh hehhh sepat i can answer u'r question based on surveying on ori and taiwan made parts....

1. if u wanna change all the ori part it would be costly...the ori CTR grill itself cost RM600 approx...the CTR ori lamp cost RM1300...so if u wanna buy ori item just buy this 2 things okie.

2. if u mix up this 2 things ori with the rest taiwan made shoul be any problems...

3. just buy the ori rear lamp..white/red..RM 760 approx the rest taiwan should be okie..

4. front it cost more than 2K...rear end 1k++

5. GC motorsport/best-1 [/b][/quote]
Pretty much what avantasia said but I think the CTR grille is around RM450.

Get the original parts if you could. If you decide to go for Taiwanese parts then limit it to metal body parts only while the headlights and rear lights should be orginal to serve the next better years to come. Taiwanese parts won't line up properly for sure but it's subject to individual judgement.

I bought myself a 2000spec CTR front bodyparts back in 2002 for 3.5K, traded in my 96 for 0.8K so I got a balance of 2.7K. Spent almost 2.5K for the rear end conversion, OEM red/clear tail, OEM rear bumper, OEM trunk lid, OEM rear bumper lid and the highly sought after OEM EK4 spoiler...

Prepare yourself 7K for doing the conversion with paint job for all OEM stuff.
 
JINEIL2EN, here are some better pictures of the Mugen sideskirts and this EK Coupe is more like a walking catalog of Mugen products for EK, everything Mugen in and out, you name it... :o

http://a1.cpimg.com/image/07/E7/43305991-2f3a-028001E0-.jpg

http://a3.cpimg.com/image/09/E7/43305993-a952-028001E0-.jpg

http://a4.cpimg.com/image/0A/E7/43305994-d54b-028001E0-.jpg

http://a2.cpimg.com/image/08/E7/43305992-0748-028001E0-.jpg

http://a4.cpimg.com/image/7C/B9/43241084-fba0-01E00280-.jpg

http://a9.cpimg.com/image/E1/EE/43306209-bd72-028001E0-.jpg

http://a0.cpimg.com/image/E2/EE/43306210-ecb4-028001E0-.jpg

http://a6.cpimg.com/image/FC/B5/43240956-f5bc-028001E0-.jpg

http://a7.cpimg.com/image/FD/B5/43240957-0905-01E00280-.jpg

http://a7.cpimg.com/image/B9/DC/43305657-2884-028001E0-.jpg
 
Even the mirror cover is Mugen.... Now anyone here beat that.

http://a0.cpimg.com/image/AA/F4/43306410-ccde-028001E0-.jpg

http://a1.cpimg.com/image/3D/F1/43306301-9b1c-028001E0-.jpg
 
Hikaru ....
NICEEEEEEEEEEEEEEEEEEEEEEEEEEEEEeeeeeeeeee
 

Similar threads

Posts refresh every 5 minutes




Search

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience