Am back after after a long time. Previous my ecu ic was burned. Thanks to some help from zth sifus. In the end I bypass the issue. Lol for time being. Till I change the engine. However I am looking for this items not sure what bumper is this can anyone help me pls. Can this fit into my 1996 ae111 local body ?
AE92 TRD strutbar
Kakimoto chambered muffler
4age 20v toda flywheel
4age 20v clutch set need not new as long as above 85%
tanabe df210 ae101/ae111 lowering springs
tanabe precede superdown ae101/ae111 lowering springs
shop to fix meter wiring, install sandwich plate and wire oil pressure to GT gauge, replace flywheel and clutch and find gear oil leak
Looking for ae92 4agze map sensor version complete engine wiring ecu fuse box etc,cam sensor,coil,stock 4agze injector,anyone have it do sms/call/whatsapp fai 0168309341,Thank you
AE92 TRD strutbar
4AGE 20V Blacktop MT or AT ECU 4pcs needed budget 450RM each
Kakimoto chambered muffler
4age 20v toda flywheel
4age 20v clutch set need not new as long as above 85%
tanabe df210 ae101/ae111 lowering springs
tanabe precede superdown ae101/ae111 lowering springs
shop to fix meter wiring, install sandwich plate and wire oil pressure to GT gauge, replace flywheel and clutch and find gear oil leak
AE92 TRD strutbar
4AGE 20V Blacktop MT or AT ECU 4pcs needed budget 450RM each
Oil Pressure sensor that will work with AE92 Long meter
Double layer brake servo
AE101 Roofcut with sunroof complete
Kakimoto chambered muffler
4age 20v toda flywheel
4age 20v clutch set need not new as long as above 85%
tanabe df210 ae101/ae111 lowering springs
tanabe precede superdown ae101/ae111 lowering springs
to all the heavenly sifu here, just wanna find out would it be difficult to find GTR 34 parts if there is any break downs or if there is any accidents? Moreover, will GTR owners face any problems in insuring their...
hi there.have this problem.my e8 seems to be consuming engine oil.is it normal?the engine had its engine oil serviced 3 weeks ago.now after 1000km of mileage the oil quantity seem to have dropped below full.is this...
Does Anyone here knows how to fabricate an intercoolers? i have a huge intercooler core but not so sure how to make use of it..hehe..but after google-ing a bit i do have a bit of idea..if u guys did this before pls...