Need help on 4G93T

[Dauss777]

Guys.. Im changing my TD04L turbo to a single fin TD05 Evo3 turbo..
with Evo3 intercooler.. Is this advisable? or I will lag the turbo? Im also using a GReddy/Trust Type S blow-off.. My frens said the TD04L feels more better on 4G93T.. I think I should change the injectors, fuel pump and add a fuel regulator for this kind of upgrading..rite? Someone Help!

 

[wgx3059]

U sure the EVo 3 TD05H is single fin ah? I thought its twin fin. I thought only the VR4 wan is single finned. Anyway, yes if you were to change the turbo to a TD05 its better to change your injectors and add fuel regulator. If you got extra cash go for the racing fuel pump. I hope this helps.

 

[KeonG]

and of course a fine tune with S-AFC
;)

 

[JUN]

EIII turbine is twin fin TD05H. Code is 49178 -**** I forgot edi... :P

TD04L is smaller than TD05H so will cause 'some' lag..not much though but the feeling of the pull during low rpms will be long gone if the TD05H is fitted :) Cause larger turbine ma.. :lol:

Regards;

 

[speedz1665]

so wats the advantage of using a td05 twin fin in a gsr??

 

[dolly]

bigger gains @ top end. td04 compressor map for 1.8l at 1bar is good up till 5-5.5k rpm, but for td05 single fin, its just starting to get good ^^;

btw e3 turbo would have a bigger compressor wheel than e1-2 tdo5, but if u see the maps, the small 16G has a broader operating range and imo might be more suitable for 1.8l, just my 2sen ya

 

[speedz1665]

thanks mate..so its best to get a tdo5 16g small...is this twin fin or single fin?.....if i use this snail my low end pull will suffer but gain at higher end ler...

 

[AlucarD]

dolly, exactly! Great advise... really expert ler you explanation..

Urm, low end wont suffer much if you're not on huge IC. But you'll smile at 5k to 7k rpm!! :lol:

 

[dolly]

i jus copy n paste what you msged me on msn... i must do gsr king's bidding mar

 

[speedz1665]

AlurcarD, dolly,

Lets say i'm setting the engine to the following spec..

1.metal gasket
2.td05 16 g small twin fin
3. evo 6 ic
4. evo 3 tb
5. stock internals

will this setup be alright...let say for boosting at 1 bar max....of course this will include upgrades to fuel pump , regulator and injectors...do you think this setup is good enough for a gsr and wont destroy my engine in the long run ( if i maintain max boost at 1 bar)...

 

[Dauss777]

hmm... okay...
Evo3 TD05 + Evo7 IC + Injector + Fuel Pump + Fuel Regulator = HAPPY?
hehehe.. if 1jz standard injector can fit into 4G93T ka? juz askin..
I think this type of upgrading must change the ecu.. to Microtech LT!
Thanx everyone!

 

[AlucarD]

Originally posted by speedz1665@Jan 6 2005, 10:25
AlurcarD, dolly,

Lets say i'm setting the engine to the following spec..

1.metal gasket
2.td05 16 g small twin fin
3. evo 6 ic
4. evo 3 tb
5. stock internals

will this setup be alright...let say for boosting at 1 bar max....of course this will include upgrades to fuel pump , regulator and injectors...do you think this setup is good enough for a gsr and wont destroy my engine in the long run ( if i maintain max boost at 1 bar)...

Dude, For 1 bar yes, no problemo but I would include:

1) better Fuel Pump
2) FPR
3) Bigger injectors - 450cc
3) Somethin to control fuelling. Ignition even better!!

Also assuming that your gearbox can take the power... you might need a new clutch ;)

E6 intercooler is a bit of a overkill ler ... its kinda too big for your 1.8 and small 16G.

KNN you dolly ..... :blink: :lol:

 

[dolly]

maybe get evo3 IC and with the cash you save get a safc or something to adjust ur fuel settings

i follow king's bidding kena tiao...dun follow king say scratch car....

 

[dolly]

oh yeah remember to dyno and show off ur ride!

 

[Itab]

hey guys,speaking of fuel pumps
GSR's OEM fuel pump is 80lph rite?VR4 is 100lph rite?
juz need to get this straight,read it somewhere else in this forum b4,but i forgot where i read it dee
so juz wanna confirm on this
coz i'm getting a RX-7 fuel pump,so i wanna know how much stronger it is from OEM GSR fuel pump
thanks

 

[Replay]

Hi Alucard,

This is off topic, but u still got ur exhaust manifold cover from ur EMS kit times?