Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="Veloc" data-source="post: 1063503956" data-attributes="member: 92511">If they say open pod means no CAI. If CAI, they will mention CAI.I know which one you mean bro. Those they are using a heat shield. I have some doubts about the heat shield as they do not totally isolate the hot air away. They just shield it which there are still some spaces, gaps where the hot air can still leak into the open pod. And imagine you car travelling at speeds. There is bound to be extra turbulence in the engine bay. Therefore I expect the hot air will be blown into the open pod anyway.But the CAI I show you is different. The hot air is totally isolated out of the CAI funnel/cone. The only inlet is through the CAI hose in front which you direct it to the bumper opening. However, there are weakness of this system too. Since the only inlet is in front, this system is not suitable for very high powered engines since they cannot suck in huge amount of air fast enough. KNN website specifies the max power engine that can utilise this system (250 hp for NA and 350 hp for turbo). Beyond that, you have to use the former CAI. The one with the normal, less restrictive heat shield.And for the normal (none cone type) heat shield, I would recommend to get is directly from manufacturers like KNN as they have researched and they produce shields with maximum heat shielding and maximum cold air redirection to the open pod. If make youself can. There are videos that teach in youtube. But I doubt one can accurately get the optimum measurement/shape of the shield to shield off heat.</blockquote>

Verification

The Marketplace Latest

original rare Rays Volk Racing CE28 17x8jj offset...
- Started by david tao
- Chassis and Wheels
Evasive EVS Tuning Carbon Body Kit Honda Civic Type...
- Started by aycy
- Exterior and Body
Mugen MS-C Full Bucket Seat Civic Type R FL5 FK8
- Started by aycy
- Engine and Performance
Boost Logic Boostlogic Oil Cooler Kit R35 GTR GTR35
- Started by aycy
- Engine and Performance
Linney IHI 800WHP Turbo Kit R35 GTR35 GTR
- Started by aycy
- Engine and Performance
Varis R35 GTR GTR35 Front Bumper
- Started by aycy
- Exterior and Body
HKS Spec R Titanium Exhaust with Y pipe R35 GTR GTR35
- Started by aycy
- Engine and Performance
2016 BMW 120i LCI M Sport F20 1.6 Auto
- Started by aycy
- Cars for sale
GR Yaris H&R Front Rear Anti Roll Bar
- Started by aycy
- Chassis and Wheels
BBS RI-A 10J God Spec FK8 FL5 Honda Civic Type R...
- Started by aycy
- Chassis and Wheels

Posts refresh every 5 minutes

timing belt tension got looseness while engine hot

any sifus out there can help me.. :adore:

i got headache to think bout it.my engine is evo4. :bawling:

Outing to Bentong

Hi Guys,

Just wanted to know if any of you guys are interested to join a drive to Bentong (Pahang) to enjoy a serene enviromnent, with some interesting places to view , visit, and enjoy. Life in Bentong is at a much...

FS: APP front break hose (mitsubishi)

Steel break hose taken out from evo.

Front 1 pair only.

made in japan

rm 200

call 012 2083222