what brand gold plated rca u're using? usually not the connector to be culprit for the noise, but the cable itself, the shielding, quality.
what DIY cable u're using also?
i have one ah beng way of solution la as i am doing that for my current rca cable also.
take a red and black cable then put each wire to respective rca and plug in ur HU. the other end of red/black cable u joint together the wire and u ground it the HU body.
try it out and see what the out come la.
maybe u can change ur grounding point of your amp also as i read from one page that the seat belt bolt there not a very good grounding point for amp also.
Need to ask you guys questions again if you dont mind...There is a "Snow" button besidesthe seat heater buttons. What is this for?... The reason I ask is I am worried about my car. I recently loss a...
ok guys,
i'll make this simple,
Who wants to go test drive the new 07 mitsubishi Lancer!!!!!!!!!!!!
wednesday 8th August 2007. meet at 11am (location to meet via sms)
There will be some refreshments at the...