Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="speed2horizon" data-source="post: 4285699" data-attributes="member: 30831">Well, it works the same way like ur internal wastegate. At low boost, the wastegate releases more exhaust gasses, at high boost, the exhaust gas is used to turn the turbine remaining less exhaust to exit through the wastegate.However, due to the price difference of 38mm and 44/45mm wastegate, most of the ppl will get a 38mm. They'll work fine.The best place to mount ur wastegate is where the stock internal flap is. Get the flap removed buy a customize flange with 2 holes. 1 hole foe turbine exducer and 1 hole for wastegate. Extend the hole for wastegat. With a 1 1/2" schedule 10 pipe and mount ur wastegate there. Remember to port the hole on the turbine housing to 38mm to suit ur wastegate. If u doesn't like the noise of the wastegate, u may vent to wastegate outlet back into the downpipe.An alternative location would be removing the flap on ur manifold outlet and mount the wastegate at the centre of the hole with the wastegate inlet pipe on top of the manifold. Please make sure the fabricator knock off all the welding flux and left overs COMPLETELY. If not handle propey, it may comes out later and damage ur turbine fin later.I have mine mounted between runner 1 n 2. But I bored a 38mm hole, shape the manifod flat at the place where I mount my wastegate, then weld the wastegate flange on the flat surface. My welding is only at the top of the manifold. Hope it helps.</blockquote>

Verification

The Marketplace Latest

Advan GT Beyond 19 Civic Type R FK8 FL5 Rim Wheel
- Started by aycy
- Chassis and Wheels
TE37 Saga S Plus 18 Civic Type R FL5 FK8
- Started by aycy
- Chassis and Wheels
Perodua Bezza body kit/spoiler
- Started by jeff6126
- Exterior and Body
Honda Jazz FLRS side skirt
- Started by jeff6126
- Exterior and Body
yellowcaliper /caliperspray
- Started by jeff6126
- Exterior and Body
Te37 Track Edition 2 FK8 FL8 Civic Type R Rim Wheel...
- Started by aycy
- Chassis and Wheels
Revozport R35 GT Wing Spoiler and Trunk
- Started by aycy
- Chassis and Wheels
original rare Work Emotion 11R 18x8.5jj offset +47...
- Started by david tao
- Chassis and Wheels
Spoon FK8 FL5 19 inch rim wheel Type R
- Started by aycy
- Chassis and Wheels
Litchfield GTR R35 Road Suspension Kit Absorber
- Started by aycy
- Chassis and Wheels

Posts refresh every 5 minutes

The New CKD Peugeot 207 Available Now from Nasim at RM72,888

Details:

Price: Estimated RM72,888.00
Engine: 1.6L - 110 hp at 5,800 rpm and 149 Nm at 4,000 rpm...

DIY: Golf ball shifter knob

I was looking around for a new shifter knob to brighten up my already drab looking 11-year old interior. Hunted around and found some neat ones but at very steep prices. So i thought, why not make my own?

Found a...

Warning RB26DETT OnBoard

Warning!, RB26DETT OnBoard

Warning RB26DETT OnBoard

Look yourself the R33 GT-R Smokes NSX and Nissan 300ZX very easily...

http://www.kyushu-danji.com/mov/20041121destai/destai_20041121.wmv