Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="ninja_iga" data-source="post: 107511" data-attributes="member: 901">hi Tormentfor the first few times, it's free. After satisfactory setting is achieved, subsequent settings are RM300 each time for ALL 4.actually,having remote damping adjustablity is not as versatile as it sounds. It's merely a 'tap' like your water tap. Buka besar, oil flows more, hence softer. Tutup, no oil flow, hence hard(er)but all of these is taking place in a pretty small hole, about 1mm in diameter!!if you allow me to explain further,soft/hard is help/assist compensate for what the valves can't achieve/ not time to achieve.It's more of a convinience than a proper solution in the long run. IF the damping is totally off, then twisting the knob to adjust wont do shit, as it's adjustment scopes are very limited range only.so a better absorber design would be : valving adjustable, then fine-tuned by soft/hard.but then comes practical issues: price. price for a Tein soft/hard cannot be compared to a TiTAN. WHY??because the Teins used for comparision are :twin tubes (cheaper to manufature)not invertedlower end product (although works good)MASS produced by the hundreds or thousands for the general public.you guys should put some brand's range to compare properly, such as RG's Motorsport range to compare with TiTANstheirs are similar spec that's why i say pls pls use this as a comparisionRG's:inverted MONOTUBE (very expensive to manufacture because of high precision)top end model for brandbest possible seals usedusually custom-tune and built for youlow volume production (expensive costs!)and these are not even soft/hard adjustables, and these are designed by an ex-Chief engineer for Bilsteins! (Rudy Grebe)a Tein range with similar specs would cost maybe RM15k-17k (Putra)Now That's a FAIR comparision.Reliablity is also a big issue, if you don't know that. Because we 'twist' the knob every so often, the seals actually get microscopic scratches and this is one of main causes to leaks.Don't touch it, and it's works fine for it's projected working lifespan.PS. for TiTANs to have this 'adjustablity' built-in, it's cost maybe RM800-1000 per set of 4. And how many times do you really need to adjust the damping? :rolleyes:</blockquote>

Verification

The Marketplace Latest

R35 GTR 2020 Original Rim Wheels
- Started by aycy
- Chassis and Wheels
Greddy Trust R35 Y Pipe GTR GTR35 Exhaust Used
- Started by aycy
- Exterior and Body
Nissan Silvia S15 Door Trim Card Panel Bride
- Started by aycy
- Interior and Cockpit
Atlas Force UHP Used Tire Tyre 275 35 20
- Started by aycy
- Chassis and Wheels
R35 GTR Ohlins Adjustable Suspension
- Started by aycy
- Chassis and Wheels
Nismo LMGT4 40th Anniversary 18x9.5+12 White
- Started by aycy
- Chassis and Wheels
Rays G025 18 inch VW Audi S3 A45 CLA45 Golf MK7 MK8 Rim
- Started by aycy
- Chassis and Wheels
S13 S14 S15 Used Drift Rim Tire Set
- Started by aycy
- Chassis and Wheels
R35 Used Titanium Exhaust
- Started by aycy
- Engine and Performance
PWR FL5 / FK8 Street Radiator 42MM
- Started by aycy
- Engine and Performance

Posts refresh every 5 minutes

First Impressions: 2019 G20 BMW 330i M-Sport

First Impressions: 2019 G20 BMW 330i M-Sport...

DIY cold air intake (need comments)

http://i21.photobucket.com/albums/b293/Kyusuke_FD3S/P8200038-1.jpg

hi every master,
i am want to DIY cold air intake...
the purple line inside the picture which is my planning connection...
the circle part is i want...

Advan RG 18" GTR offset
18 x 9.5 offset 12 all round
condition is like new

RM5500 nego

OS Giken 3 Cross mission Close ratio gear Type A
Brand new with Brand new Reinforce input shaft as well
FIT RB26DETT R33,R32...