Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="gerard" data-source="post: 260415" data-attributes="member: 7656">Hi guys,With regards to the supercharger bolt on kits and advantages of superchargers, you could refer to a post which I've submitted in the ZTH under, car modifications section...I do agree to a certain degree that you can't boost high with bolt on kits, be it turbo applications or supercharged applications BUT my golden rule of thumb is if you get the fuel curve, fuel mapping & timing right with no detonation you could run higher boost which I've proven with my GTI 1.8 (4G93P) with a bolt on kit and at stage one with stock clutch, pistons, no metal gasket, or forged pistons, basically NA engine and gearbox with a boost of 0.7 bar. Just with the help of fuel mapping, extractor, full exhaust system and after market air filters. It registered 162.3hp on wheel and max torque at 200nm @ 2800rpm....Been running stage one with no problems for 3 years now and even did a long trip to PHUKET (2400km) with the GTI club last year.......2003As for our stage 2 kit, still using the same stuffs, maybe mod a bit here and there I'm running 1bar of boost now (1 year)...Sorry guys, can't reveal any further information or details on stage two yet as it is still not ready to hit the market yet..As for your question on Gen2, Turbo Sang did discuss with me on the possiblities to develope a supercharger bolt-on kit for the Gen2 model, unfortunately, to me it is still a fresh new engine (not proven yet, unlike mitsubishi) and we would require a bit of time to understand its fuelling system, electrical (EMS), gearbox system before we begin R & D works. Oh! . the other problem is that we do not have a test car yet to do and R & D work. Hahaha :D Do keep me posted, should you manage to get an installer to install a supercharger unit in your Gen2....Just beware, you must get a competent installer else your nightmare has just begun...Do contact us once in a while to check on our progress. ..who knows, a Gen2 may be in the making. :rolleyes: I could be contacted at 012-3073928, 012-3872153Many fine regards and happy new year :D Gerard</blockquote>

Verification

The Marketplace Latest

R35 GTR 2020 Original Rim Wheels
- Started by aycy
- Chassis and Wheels
Greddy Trust R35 Y Pipe GTR GTR35 Exhaust Used
- Started by aycy
- Exterior and Body
Nissan Silvia S15 Door Trim Card Panel Bride
- Started by aycy
- Interior and Cockpit
Atlas Force UHP Used Tire Tyre 275 35 20
- Started by aycy
- Chassis and Wheels
R35 GTR Ohlins Adjustable Suspension
- Started by aycy
- Chassis and Wheels
Nismo LMGT4 40th Anniversary 18x9.5+12 White
- Started by aycy
- Chassis and Wheels
Rays G025 18 inch VW Audi S3 A45 CLA45 Golf MK7 MK8 Rim
- Started by aycy
- Chassis and Wheels
S13 S14 S15 Used Drift Rim Tire Set
- Started by aycy
- Chassis and Wheels
R35 Used Titanium Exhaust
- Started by aycy
- Engine and Performance
PWR FL5 / FK8 Street Radiator 42MM
- Started by aycy
- Engine and Performance

Posts refresh every 5 minutes

DIY - Cooler AirCon for FREE

Hello Taikos and Bros...
(Been a while since my last DIY posting here. Was doing Car specific DIY articles for the last few years)...

These days, Haze la, Weird Weather la, Malaysia very hot... So, why not have a...

HPC Open Track Day 20 Dec 2009

High Performance Challenge

December 20th AVAILABLE SPACE
Group 1 - 38 Spaces
Group 2 - 33 Spaces
Group 3 - 25 Spaces

Who's going? I already registered just now in G1...

car batterey

i just changed my car batt into the maintainance-free type 13 plates 70
before this i was using the normal car battery 13 plates 70
i noticed that the rpm drops more when i on my air cond after i changed my batt...