Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="phat7" data-source="post: 1969918" data-attributes="member: 3001">Alchemis explanation is very basic but fundamentally correct. Auxilarry Injection systems like water/alky injection is recommended for turbocharged vehicles. The explanation, water does not burn. The cooling in our engine happens with fuel which is why many say rotary engines consume loads of fuel. As mentioned earlier water does not burn but instead when introduced to the combustion chamber it reduces intake temperatures and absorbs heat which in our application reduces the chances of predetonation. Rotary Engines have 2 firing sequences First Being the Leading then Trailing (this order) As intake temps increase with higher load there are very high chances of both L and T firing at the same time especially in boost areas and this will cause permanent engine damage. So water injection helps. But what about power you may ask. If you tune your water injection system you may well advance your leading timing to take advantage of cooler intake temps but please make sure you always check water supply coz if you;ve tuned it then running boost without water may also cause damage. Alky/water 50:50 is another way to boost power but you;ve gotta tune it. Alcohol Denatured is combustible so you can pretty much gain in terms of fuel savings and power.Water injection allows you to remove more fuel in specific fuel maps IF you tune for it. In my case its just a safety buffer i like so its not tuned. The system is manufactured by very reputable companies and cost about 1.5k to 4k depending on setup. Important to note that nozzle sizes/design, pump (safe for water and alcy) run 150psi, sensors and not your typical homemade idea. Its designed to be adjustable to vary delivery based on boost or mad reference.</blockquote>

Verification

The Marketplace Latest

Mugen MS-C Full Bucket Seat Civic Type R FL5 FK8
- Started by aycy
- Engine and Performance
Boost Logic Boostlogic Oil Cooler Kit R35 GTR GTR35
- Started by aycy
- Engine and Performance
Linney IHI 800WHP Turbo Kit R35 GTR35 GTR
- Started by aycy
- Engine and Performance
Varis R35 GTR GTR35 Front Bumper
- Started by aycy
- Exterior and Body
HKS Spec R Titanium Exhaust with Y pipe R35 GTR GTR35
- Started by aycy
- Engine and Performance
2016 BMW 120i LCI M Sport F20 1.6 Auto
- Started by aycy
- Cars for sale
GR Yaris H&R Front Rear Anti Roll Bar
- Started by aycy
- Chassis and Wheels
BBS RI-A 10J God Spec FK8 FL5 Honda Civic Type R...
- Started by aycy
- Chassis and Wheels
Rays Gram Lights 57CR GR Yaris Subaru Impreza Rim...
- Started by aycy
- Chassis and Wheels
2019 Toyota FORTUNER 2.4 VRZ 4X4 (A) Diesel
- Started by aycy
- Cars for sale

Posts refresh every 5 minutes

2010 Merdeka Millennium Endurance Race - Qualifying Results

https://www.zerotohundred.com/wp-content/uploads/2010/08/DSC_0300-600x398.jpg

The qualifying for tomorrow's 2010 installment of the Merdeka Millennium Endurance race has just ended and posted below are the complete...

Garage Sales for Altezza Stuff at Trial Tuning @ Riyoz Racing

I have talk to William and convinced him to have a garage sales for spare and performance parts for Altezza...most probably in mid July'10.

There will be parts like halfcut, gearbox, sport suspension, Modellista...

selling all performance parts for r34 gtr rb26 page2

1)hks Fuel Rail And Hks 680cc Injector Rm2700 (sold)
2)hks R Type Intercooler Rm3000 With Piping Rm3500 (sold)
3)hks Intercooler Piping Rm800 (sold)
4)koyo 3 Layer Radiator with samco hoses Rm2200 (sold)
5)tomei Oil...