Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="puyukrl" data-source="post: 2414743" data-attributes="member: 53845">Hi guyz, i also own a perdana. Mine is a V6. Just clock 100k mileage about a month back and like all of you said, it start giving problems. When i sent the car to change all the beltings, the mechanic told me the engine mounting has worn out, head gasket leaking, worn-out drive-shaft, leaking autogear box oil sump, alarm not working properly/ no sound, need to change the valve or something in the engine head coz its making sound. The valve thing as i was told is around Rm140 each and a V6 has 24 of them. (just imagine RM140x24) I was told all of that would cost me a lot and it is a better option if I change the engine, e.g: 6A12tt. Better in term of performance and money (expensive to overhaul the v6 engine). He said some half-cut 6A12TT has low mileage as low as 30k only and are far more superior in terms of quality. What do you guys think? Any suggestion? Which is the better option, fixing all the problems or changing the engine? I don't prefer a turbo engine becoz its more expensive to take care off then the NA version and its fuel consumption is very bad but I was told by the mechanic the turbo engine has good fuel consumption if I drive it normal (not fast all the time). If NA engine version, can i get the FTO Mivec V6 for my car? I was also told the Mivec V6 version for my Perdana comes from Eterna and not from FTO. Maybe the engine mounting is a bit different. I not a speed demon, but i don't mine going fast sometimes. Some help here please? Thank you.P/S: Mathavan, i believe you can convert your car engine to a 4g63t (turbo)engine becoz of the engine mounting. The engine is also cheap nowdays and I believe the spare-parts is also chaep and easy to get. Maybe chaeper than a perdana v6 engine and V6 spare parts.</blockquote>

Verification

The Marketplace Latest

Perodua Bezza body kit/spoiler
- Started by jeff6126
- Exterior and Body
Honda Jazz FLRS side skirt
- Started by jeff6126
- Exterior and Body
yellowcaliper /caliperspray
- Started by jeff6126
- Exterior and Body
Te37 Track Edition 2 FK8 FL8 Civic Type R Rim Wheel...
- Started by aycy
- Chassis and Wheels
Revozport R35 GT Wing Spoiler and Trunk
- Started by aycy
- Chassis and Wheels
original rare Work Emotion 11R 18x8.5jj offset +47...
- Started by david tao
- Chassis and Wheels
Spoon FK8 FL5 19 inch rim wheel Type R
- Started by aycy
- Chassis and Wheels
Litchfield GTR R35 Road Suspension Kit Absorber
- Started by aycy
- Chassis and Wheels
original rare Yokohama ADVAN Racing RG3 18x8.5jj...
- Started by david tao
- Chassis and Wheels
~accident repair ~touch up paint
- Started by jeff6126
- Exterior and Body

Posts refresh every 5 minutes

Adjustable shock absorber

Option1: TEIN Street Basic Damber (RM3000)
Ride height adjustable, Hi & low

Option2: DD Drag N Drift (RM2500)
Ride height adjustable, W pillow ball mount, 40 Soft hard

What is your choice and why?

Evo 7 turbo issue

Dear All,

Recently, i noticed that my engine oil level is decreasing .

Thus, i had the issue checked and found out that the shaft on the turbine ; near / on the fins are " shaking ".

Is it a norm for the shaft on...

Nismo Unveil 2012 Motorsports Activity Plan