Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="sakuraguy" data-source="post: 1628046" data-attributes="member: 6441">RB30Three models of 3.0L RB30 were produced:RB30S - carburetted single-cam RB30E - injected single-cam (114kW) [3] RB30ET - injected single-cam turbo The motor is a cast iron block with an alloy head, and a SOHC at 86x86. This motor was produced because the Holden 202 (3.3L) powering the Holden Commodore could no longer satisfy emissions requirements, and with all new cars required to run on unleaded petrol by 1986, a quick replacement was needed. Nissan Motor Co. teamed up with GM to build their biggest displacement RB, the 3-litre RB30E. The RB30ET was only found in the VL Commodore. The RB30S was found in South African R31 Skylines. The RB30E was found in R31 Skylines and VL Commodores.RB30DEThese rare engines were used in the Tommy Kaira M30 based on the R31 Skyline GTS-R. It delivered 177 kw @ 7000rpm and 294 Nm @ 4800rpm. Apparently the engine was made up of a RB30 bottom end mated to a modified RB20DE head. These engines also exists as a hybrid conversion using a RB30 bottom end and a RB25DE head.RB30DETRB30DET - R31 RB30E block, R32 RB25DE head.Nissan did not produce this engine, but it refers to a turbocharged engine featuring an RB30E block with a twin-cam head conversion. Common hybrid in Australia using a RB30E bottom end mated to a RB25DE cylinder head and turbo. The RB25DE cylinder head from the R32 Skyline, A31 Cefiro or C33 Laurel can be used. The RB25DET (from the R33 Skyline or C34 Laurel or Stagea) head is also used, however an external oil feed must be fabricated for the variable cam timing on the RB25DET which further compicates things.http://img372.imageshack.us/img372/3328/543pxrb30det2xy7.jpgAlthough it has a larger displacement than the RB26DETT, maximum possible horsepower is less, as the RB30 block lacks the RB26 block's internal cast-in bracing, and consequently cannot rev as high due to harmonic issues at ~7500RPM. To compensate, the RB30DET produces more torque at lower revs. There is also an 'RB30DETT' kit manufactured by OS Giken of Japan, which bolts an extension on top of the RB26 engine block, and fits liners, to give a 86mm bore x 86mm stroke. It is available as an assembled short block, containing billet chro-mo crank, billet chro-mo H-beam rods, forged pistons, and costs ¥1 500,000.</blockquote>

Verification

The Marketplace Latest

BBS RI-A 10J God Spec FK8 FL5 Honda Civic Type R...
- Started by aycy
- Chassis and Wheels
Rays Gram Lights 57CR GR Yaris Subaru Impreza Rim...
- Started by aycy
- Chassis and Wheels
2019 Toyota FORTUNER 2.4 VRZ 4X4 (A) Diesel
- Started by aycy
- Cars for sale
Advan GT Beyond 19 Civic Type R FK8 FL5 Rim Wheel
- Started by aycy
- Chassis and Wheels
TE37 Saga S Plus 18 Civic Type R FL5 FK8
- Started by aycy
- Chassis and Wheels
Perodua Bezza body kit/spoiler
- Started by jeff6126
- Exterior and Body
Honda Jazz FLRS side skirt
- Started by jeff6126
- Exterior and Body
yellowcaliper /caliperspray
- Started by jeff6126
- Exterior and Body
Te37 Track Edition 2 FK8 FL8 Civic Type R Rim Wheel...
- Started by aycy
- Chassis and Wheels
Revozport R35 GT Wing Spoiler and Trunk
- Started by aycy
- Chassis and Wheels

Posts refresh every 5 minutes

fitting a 235/40/18 into 18x9.5 rim

as title above...will it be overstretch ? please give me some advise on it ...

recommended tyre for this setup ?

really appreciated your help on this ! :D

Genuine RETARD RACING 650 mm double plasma ball bearing jet turbo 4 sale!

Genuine RETARD RACING 650mm double plasma ball bearing jet turbo for sale.

Why RETARD RACING 650mm double plasma ball bearing jet turbo?

Becoz its the only rear mounted turbo in the world with the nozzle pointing...

Skyline GTR - 34 original wing/spoiler

Black with Titanium grey blade. Original spoiler. Very good condition. Asking for RM$2200. Item in Singapore. Have Pics.

Can meet up in Johor, Jusco or self collect in Singapore.

PM for details.
Z