Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="cipan_supercas" data-source="post: 2113527" data-attributes="member: 1945">Wow.... your list is so long..... feel lazy a bit to do the MS listing but here are some info on top of my head.MS have all the features you listed but some differences here;1. MS do batch injection but can be made sequential if using MS3 which is still under development. FYI, the mighty RB20/25 is also using batch injection and still produce great output. 4A-GE fires all the 4 injectors at once and still becomes the engine of choice for those drifters. In short, you'll say it's good if you take note of how that works but your mind starts to think something else when you thought that batch fire will create some drawbacks even though that's not the case. At high rpm, the time will become so close that the sequential injectors too will actually continuously inject fuel. 2. MS can be made to work as COP sequential ignition firing but you have to buy extra parts and configure it inside the software. it's that simple. However, to mount the hardwares on the engine is not that simple. Best option, use whatever configuration/hardware your existing engine have.3. Can work till 8 low impedance injectors without the resistor pack. Use the software to limit the current.4. Mapping is 12x12 but can be expanded to 24x24 if you need to which is usually not required.5. RPM setting is totally variable up to you. Not only the rpm limit is variable, you can adjust the mapping load/rpm according to your taste. You can even have till 25k rpm or 35k rpm. Up to you. The map is interpolated, so you don't need that every 500 rpm boxes. You can set at any no. you like to suit your application. Totally variable. You can also switch it to the 3D graph to tune.6. Real time dwell control.7. You can have some optionals too;7.1. Shift light7.2. Boost controller7.3. NOS control7.4. Water injection control7.5. Actually, you can control anything you like. Your choice and creativity. You can use coolant, rpm, air temp, MAP pressure, TPS, EGO etc. to act as your switch to activate your applications.8. You can configure MS to work with almost any engine, be it 2 stroke 1 cylinder motorcycle engine or that 4 stroke 8 cylinder muscle cars. You don't have to sent it back to the manufacturer to do that. It's diy.... Emmmm... talking about diy, won't you have that 'pride' too...???</blockquote>

Verification

The Marketplace Latest

Mugen MS-C Full Bucket Seat Civic Type R FL5 FK8
- Started by aycy
- Engine and Performance
Boost Logic Boostlogic Oil Cooler Kit R35 GTR GTR35
- Started by aycy
- Engine and Performance
Linney IHI 800WHP Turbo Kit R35 GTR35 GTR
- Started by aycy
- Engine and Performance
Varis R35 GTR GTR35 Front Bumper
- Started by aycy
- Exterior and Body
HKS Spec R Titanium Exhaust with Y pipe R35 GTR GTR35
- Started by aycy
- Engine and Performance
2016 BMW 120i LCI M Sport F20 1.6 Auto
- Started by aycy
- Cars for sale
GR Yaris H&R Front Rear Anti Roll Bar
- Started by aycy
- Chassis and Wheels
BBS RI-A 10J God Spec FK8 FL5 Honda Civic Type R...
- Started by aycy
- Chassis and Wheels
Rays Gram Lights 57CR GR Yaris Subaru Impreza Rim...
- Started by aycy
- Chassis and Wheels
2019 Toyota FORTUNER 2.4 VRZ 4X4 (A) Diesel
- Started by aycy
- Cars for sale

Posts refresh every 5 minutes

continental max contact 5 (mc5)-good tyres

purchased 4 new tyres continental max contact 5 (mc5) and found it to be excellent tyres in dry and wet conditions..love it!! :adore:

pls help my lil bro

halo...2 all sifu...my lil bro just bought r34 N.A ....can any body help him wanna install turbo kit....and also d budget...tanx so much

Get feature in Em2Mag

Hi All,

If you want to get your sexy car featured in Em2Mag. You can kindly send me the picture of your car to me.. You want to know more about Em2Mag you can also pm me.

Thanks.

Rgds.