Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="bridgestoneRE711" data-source="post: 675945" data-attributes="member: 8735">erm .. what i mean is the material that is used , it has a certain grade . for sure, it is acceptable for the spark and the fuel with higher octane , or octane booster becasue i don't think that the engine block limitation is on the edge depends on the current fuel octane level . those fuel octane booster should not be a problem if u use it depends and follow the instruction . the octane higher means that the fuel can be compressed more , because it is more compressed , therefore the power is better .that is what i understand . unless u pour one octane booster into the near finish fuel tank , then sorry . the spark that will produce heat . i am not sure about that will it harm the engine. but i think the engine can hold that spark too . becsaue the spark is to burn the fuel more efficient , more proper fuel burnt . the spark is mrean to burn the ratio , lets say the fuel ratio 4:1 , and fully spark and burnt it . produce more efficient power . compared to more air , which makes the ratio of airfuel , lets say 6:1 . if it spark , the ratio is wrong , the spark remain the same , and the airfuel mixture will burn and cause the combustion too dry , leaving excessive air and improper burning that will leave the combustion too dry and harm the engine . a proper burnt of the airfuel mixture doesn't mean dry , it is becasue it brings out almost most of its power at the correct volume . at one spark , the proper burnt fully . and leaving nothing more or nothing less behind . if it is mean to be too much air , a microcompressor the burn will just leaving some unburnt air inside the combustion . compare to the air fuel ratio which is incorrect ... not up to ratio . which will makes the engine too lean/dry or too rich. this won't cause a proper buring of the air-fuel , but it will just make the air fuel burnt in a improper way which is quite harmful and damage the engine .</blockquote>

Verification

The Marketplace Latest

R35 GTR 2020 Original Rim Wheels
- Started by aycy
- Chassis and Wheels
Greddy Trust R35 Y Pipe GTR GTR35 Exhaust Used
- Started by aycy
- Exterior and Body
Nissan Silvia S15 Door Trim Card Panel Bride
- Started by aycy
- Interior and Cockpit
Atlas Force UHP Used Tire Tyre 275 35 20
- Started by aycy
- Chassis and Wheels
R35 GTR Ohlins Adjustable Suspension
- Started by aycy
- Chassis and Wheels
Nismo LMGT4 40th Anniversary 18x9.5+12 White
- Started by aycy
- Chassis and Wheels
Rays G025 18 inch VW Audi S3 A45 CLA45 Golf MK7 MK8 Rim
- Started by aycy
- Chassis and Wheels
S13 S14 S15 Used Drift Rim Tire Set
- Started by aycy
- Chassis and Wheels
R35 Used Titanium Exhaust
- Started by aycy
- Engine and Performance
PWR FL5 / FK8 Street Radiator 42MM
- Started by aycy
- Engine and Performance

Posts refresh every 5 minutes

WRX from NY > Hi all

hey all:

Just registered on this forum ... owned a 2002 wrx in NY. Was from Butterworth Malaysia and found this nice forum from my home country !

Posting some pics of my car :) .. enjoy...

ordering item from website... advice!

hi guys,

i've few Q's to ask all regarding buying stuff from internet and bringing to m'sia... for example
thinking of buying from Rhdjapan.

1) does all the item will be taxed by malaysia custom?

2) rhdjapan.com...

SR21 Engine for Sale

I got a SR2.1 210cc engine fro sale. Come complete in everything from Greedy pulley tto Tmei exhaust manifold. Thngs that are not included in the engine are only Turbo, Wiring, ECU.

ASking for Rm10,000 Nego...