Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="kennethfong" data-source="post: 2019145" data-attributes="member: 4371">Bro Cipan, Ivan,Thanks for the reply, last nite i got myself a straight thru DB9 male to female (not null model type), so plug this into my desktop PC, the hyperterminal works finally!!! Tried even the mini-terminal from megatune 2.25 n it works as well....bout the crystal Y1, i used silicone sealant and it's working fine at the moment....Which means my USB 2 Serial is f**ked up....the steps i'd done to make sure it works:- went to control panel system hardware device manager n choose baud rate = 9600, databits = 8, stop bits = 1, flow control = none, buffer = off or 1- setup the same thing with the hyperterminal settingsKhoyos, u mentioned u got your USB to serial at lowyat aar, OK i suppose it should be the same with mine cheapo cable, could you please send me your driver that you use via email?? i can be reached at <a href="mailto:kennethfong98@hotmail.com">kennethfong98@hotmail.com</a> or <a href="mailto:kenneth.fong@teleplan-my.com">kenneth.fong@teleplan-my.com</a>asking this coz i'm not planning to use my desktop PC to tune my car, it's too bulky, i've just upgraded my desktop pc with all super duper heavy duty mod (which adds good weight) + heavy rolled steel server chassis with xtra space for my radiator n water cooling block, all these add up to almost the weight of our heavy 29 inch CRT TV, and then the my stupid 21 inch heavy CRT monitor, LOL....now i've come to the part where i've tested the processor with megatune, the 255 seconds time works and battery voltage is OK.... everything is fine and now and i've come to a cross road to step 50 of choosing VR or hall or both.... i guess it'll be both...Cipan, i'm using the code variant as of the moment as MS-I, the MSNS-Extra is already preloaded by DIYAUTOTUNE or I still need to do something with it to run MSNS-E?Also cipan, ugpm for my plan to Kay El trip....</blockquote>