Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="edgar_raphael" data-source="post: 1453426" data-attributes="member: 463">Hi, the reason why I didnt make the mould in the first place is because, it is not necessary for me to do so. In order for me to proceed on making the mould, it will leave me to a near completed job, ready to be painted. Since I have no intentions to reproduce the eyelids for sales purposes or any other purposes and prefer to keep the lids for my own, I decided to leave it just as it is.The surface of the original fibreglass lids have been covered entirely with putty/bogs fillings and sanded down for smooth-ready-to-be-painted surface, which is also essential to overlay with thick layers of fibreglass to therefore produce the mould. But as I said before, I have no intentions to reproduce the lids so I painted it straight away.Some may argue that covering the whole surface with fillings is not recommended because chances of cracking the surface in the future is high, but however, you have to note that these are small little piece of fibreglass and it sticks straight on to the headlights, no screwing or no rattling or knocking on any other panels and it will stay as it is for the rest of the time, so I won't see any chances of it getting cracks and have never since, seen any problems with it.Thanks for the compliment</blockquote>

Verification

The Marketplace Latest

R35 GTR 2020 Original Rim Wheels
- Started by aycy
- Chassis and Wheels
Greddy Trust R35 Y Pipe GTR GTR35 Exhaust Used
- Started by aycy
- Exterior and Body
Nissan Silvia S15 Door Trim Card Panel Bride
- Started by aycy
- Interior and Cockpit
Atlas Force UHP Used Tire Tyre 275 35 20
- Started by aycy
- Chassis and Wheels
R35 GTR Ohlins Adjustable Suspension
- Started by aycy
- Chassis and Wheels
Nismo LMGT4 40th Anniversary 18x9.5+12 White
- Started by aycy
- Chassis and Wheels
Rays G025 18 inch VW Audi S3 A45 CLA45 Golf MK7 MK8 Rim
- Started by aycy
- Chassis and Wheels
S13 S14 S15 Used Drift Rim Tire Set
- Started by aycy
- Chassis and Wheels
R35 Used Titanium Exhaust
- Started by aycy
- Engine and Performance
PWR FL5 / FK8 Street Radiator 42MM
- Started by aycy
- Engine and Performance

Posts refresh every 5 minutes

KIA 1.8Turbo Auto

KIA Motor Swap to Mazda 1.8 turbo engine

Spec
1.KIA Spectra Body
2.Engine stock BP 1.8 Turbo
3.EMS Fuel Controller
4.Stock Turbo
5.Stock KIA Auto Trans
6.Walbro Pump intank
7.Fuel regulator

All Engine Mounting...

www.japanbidmy.com

Hey guys....

Check this out, here is all the Skyline stuff u can get from Japan...

DIY Dicharge Cutting System (DCS)

Dear, all members.
I try to modify the DCS to improve horse power. The detail will explain later. :D