Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="shiroitenshi" data-source="post: 2051959" data-attributes="member: 27518">That's just to have the B20B block with VTEC line.. no other stuff put in..(depends on how much you can get the block for.. I think the going rate is about RM800 a block, +VTEC line, near 2K.. so unless you install yourself, then your budget is still not enough.. :P.. Oh.. the 2K isn't including engine management.. so maybe I put too low a quote there.You won't make much hp numbers, but you'd have more torque at lower end than a b16a..a sort of budget upgrade, in a way. It's really a cheap 'low end' setup, a 'very very basic' B20B setup. low compression pistons of the B20B is the weak link of the basic set. Cam wise.. one has to wonder if you need such high duration when you're rev limited to 8K. Standard B16A cams is quite enough already, if you're not revving past that 8K mark..It's one thing to plonk in a B20B block, it's another matter building it to make more power than a B18C. That's why the big gap in pricing.If you're on a budget, CF4 pistons, standard B16A cams and intake can net you some good hp numbers, probably near to what a stock R makes.. at a fraction of the price.. consider the price of a complete R engine, and you'd see where I'm hinting at. Of course, you need H22A injectors as well, so add about rm450 to that.But overall, the other stuff like intakes and headers can come later, since you'd still be able to run the engine with stock B16A mods like headers and such. It's a bottleneck, but one that can be adjusted with tuning.Another thing about comparing B20B and B18C is, you're comparing PEAK hp numbers, which you only see at 6-8K rpm when you're comparing B18C and B20B.. get dyno charts of both engines, and see how the power is distributed across the rev range.. that's what power is.. not just peak hp. I've seen a B20B chart on a mid range B20B setup before.. needless to say.. it makes torque at 3-4K like mine makes at 6K after vtec.. but with no drastic increase after VTEC like the B16A/B.... still that can be 'kawtim-ed' with further mods. :P</blockquote>

Verification

The Marketplace Latest

Mugen MS-C Full Bucket Seat Civic Type R FL5 FK8
- Started by aycy
- Engine and Performance
Boost Logic Boostlogic Oil Cooler Kit R35 GTR GTR35
- Started by aycy
- Engine and Performance
Linney IHI 800WHP Turbo Kit R35 GTR35 GTR
- Started by aycy
- Engine and Performance
Varis R35 GTR GTR35 Front Bumper
- Started by aycy
- Exterior and Body
HKS Spec R Titanium Exhaust with Y pipe R35 GTR GTR35
- Started by aycy
- Engine and Performance
2016 BMW 120i LCI M Sport F20 1.6 Auto
- Started by aycy
- Cars for sale
GR Yaris H&R Front Rear Anti Roll Bar
- Started by aycy
- Chassis and Wheels
BBS RI-A 10J God Spec FK8 FL5 Honda Civic Type R...
- Started by aycy
- Chassis and Wheels
Rays Gram Lights 57CR GR Yaris Subaru Impreza Rim...
- Started by aycy
- Chassis and Wheels
2019 Toyota FORTUNER 2.4 VRZ 4X4 (A) Diesel
- Started by aycy
- Cars for sale

Posts refresh every 5 minutes

WTB M-sport bodykit

hello everyone
im looking for Nissan Silvia S15 M-sport bodykit
where can i get it ?

VTG Track Day - 23 November 2009

View attachment 681859

Changing rims? Check out this site

This is a special web design by Japanese for people who don't know which rim to decide..and all brand are according to the actual Japan Manufaturer to ensure its accuracy...even the colour and background can be...