Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="satria_95" data-source="post: 1978177" data-attributes="member: 1506">skylin3lov3r,Yeah, I had a chat with a pc enthusiast colleague of mine. He stressed on good casing and power unit. Cooler master would be a good choice. I'll opt for a good casing that's about RM400-500 inclusive of power supply. He also suggested that I get 2 x 512MB RAM for dual channel purposes. Apparently, he said 2 x 512MB versus 1 x 1GB RAM, the 2 x 512MB will give a better performance. He also mentioned that 256MB of video ram would be sufficient and I could do a SLI setup later on if required. Well, I'll most probably settle in for an Asus mobo, perhaps with a budget of about RM600 or so. Graphics card, he suggested, to be around the range of RM800 - RM1000. My main focus would be mobo, video card, processor and RAM. The rest wouldn't do much to performance. Am thinking of AMD AM2 processor. heheAs for car, yeah, if I have extra's, I'd mod my car. I won't do engine transplant, though, as I'm satisfied for now with my stock engine's performance. Future plans for my engine would probably be PowerZone's performance cam shafts, cam pulley, suitable exhaust system from exhaust manifold till rear, fully adjustable abs, stainless steel air intake pipe wrapped with heat shield (have to find a suitable one), port and polish, maybe Haltech or MicroTech engine management, sound proof my whole car with industrial standard heat rejecting foil on roof, bucket seats with harnesses, custom wide wheel arches (you'll be surprised how my silly 15" rims can touch my front fender when I corner hard enough), and if I dream more, perhaps full aluminium radiator and silicon hoses, metal gaskets where applicable, performance plug cables and iridium plugs, semi racing clutch, probably 1 decent amplifier, a pair of tough and decent component speakers and probably 1 pair of sub woofers. Now that should all set me back at a price of a good amount of down payment for a good decent car. hahahahaha But imagine if I take those car modification money to build a new gaming rig. buahahahaha</blockquote>

Verification

The Marketplace Latest

R35 GTR 2020 Original Rim Wheels
- Started by aycy
- Chassis and Wheels
Greddy Trust R35 Y Pipe GTR GTR35 Exhaust Used
- Started by aycy
- Exterior and Body
Nissan Silvia S15 Door Trim Card Panel Bride
- Started by aycy
- Interior and Cockpit
Atlas Force UHP Used Tire Tyre 275 35 20
- Started by aycy
- Chassis and Wheels
R35 GTR Ohlins Adjustable Suspension
- Started by aycy
- Chassis and Wheels
Nismo LMGT4 40th Anniversary 18x9.5+12 White
- Started by aycy
- Chassis and Wheels
Rays G025 18 inch VW Audi S3 A45 CLA45 Golf MK7 MK8 Rim
- Started by aycy
- Chassis and Wheels
S13 S14 S15 Used Drift Rim Tire Set
- Started by aycy
- Chassis and Wheels
R35 Used Titanium Exhaust
- Started by aycy
- Engine and Performance
PWR FL5 / FK8 Street Radiator 42MM
- Started by aycy
- Engine and Performance

Posts refresh every 5 minutes

wta: Lancer floor mats same as evo8 ?

i am looking for new floor mats, can i buy original Lancer floor mats, to fit into my evo8mr ? anyone knows ? pls say something, thanks.

4g93 engine vibration- newbie

hey whats up all- i have a 4g93 out of an eagle summit i just replaced head gasket and timing belt on. the engine runs great but vibrates at idle. Timing seems to be ok. I read that you can get the silent shaft 180...

where got junkyard?

hi everyone.. :D

where got junkyard?

different from halfcut shop
junkyard is where the car is already taken apart...
i wan to find some...

i think it will be good place to source our parts for our DIY project...