Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="m4nzs" data-source="post: 2804787" data-attributes="member: 60697">hello guys..i`m using evo 1 engine on my wira, but everyting is still stock xcept BOV an air filter.my question is:1. how to remove the speed cut on the evo1 engine. the simplest way is most preferable : ).some say that it can be done just by cutting a specific wire (to/from ecu) that detect the speed etc.if that is true, how to determine the wire?2. what is the best plug to use for this kinda engine. somthing like BPR6EIX ?? or what is other high perfomance plug suitable.will it give so much of noticable effect to the engine or just the long lasting duration of using it.what is the effect of just using a normal plug like BP6EX? will it effect the fuel consumption or is it dangerous for the engine?3. i want to up the std boost for my car. just using the so called "tulang ikan" kinda thing.what is the max safe limit for the all stock engine liike mine? is 1.1 bar is too much for like this kinda engine with no fuel regulator, management and metal gasket? now the effective boost is about 0.65-0.70bar it will go up to 0.8bar if like `tahan` the gear but it just like over boost,cant feel oso.4.where is the best place to isntall the vacuum hose for the wastegate? is it before or after the throttle body?coz now, if i opened up the tulang ikan to increase boost, it will oso effect my BOV, BOV sound is like short while only.like terbantut.all the vacuum hose is after the throttle body (BOV,wastegate,boost meter).tq in advance.</blockquote>

Verification

The Marketplace Latest

2019 Toyota FORTUNER 2.4 VRZ 4X4 (A) Diesel
- Started by aycy
- Cars for sale
Advan GT Beyond 19 Civic Type R FK8 FL5 Rim Wheel
- Started by aycy
- Chassis and Wheels
TE37 Saga S Plus 18 Civic Type R FL5 FK8
- Started by aycy
- Chassis and Wheels
Perodua Bezza body kit/spoiler
- Started by jeff6126
- Exterior and Body
Honda Jazz FLRS side skirt
- Started by jeff6126
- Exterior and Body
yellowcaliper /caliperspray
- Started by jeff6126
- Exterior and Body
Te37 Track Edition 2 FK8 FL8 Civic Type R Rim Wheel...
- Started by aycy
- Chassis and Wheels
Revozport R35 GT Wing Spoiler and Trunk
- Started by aycy
- Chassis and Wheels
original rare Work Emotion 11R 18x8.5jj offset +47...
- Started by david tao
- Chassis and Wheels
Spoon FK8 FL5 19 inch rim wheel Type R
- Started by aycy
- Chassis and Wheels

Posts refresh every 5 minutes

Nasim Launches Peugeot Blue Box - Seremban

Nasim Sdn Bhd, the official distributor of the Peugeot brand in Malaysia, has launched a Peugeot Blue Box...

Thinking of letting go my Lancer coupe

Guys.. Anyone can recommend the price at which I should be putting it up for?

http://a5.sphotos.ak.fbcdn.net/hphotos-ak-snc6/270772_2107176714619_1101580981_3003881_2018064_n.jpg

Altezza Stuffs to let go

Fellas,

Just open up a chop shop specialised in Altezza and have few stuffs to let go at a bargain price. :regular_smile:

Rims:

Advan Siena Generation II 18 inch x 7.5 (front and Rear) + tyres + center...