Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="Tom" data-source="post: 46732">Hi guys,I finally did my AFM to MAF Conversion :)I love it so so much. The response is just fanstastic. no more stupid AFM flap to restrict the flow, most people who are like me would know that the revs will drop below idle sometime if we quickly depress and press the accellerator pedal. it's gone now :)and the air flow is just awesome. you have to feel it to believe it man.ok, let's talk about how it's done,i bought a 1998 E39 525i Siemens MAF, an aluminium connector hose, a silicon connector, and a 3" inlet Pipercross air filterYou need some sort of a chip or A/F device to tune the ECU to recognize the new air flow device.In this case, the Unichip and Unichip tecnician did all the signal adjustments, conversion and a/f settings. The plug to to the MAF will tap the ones from the former AFM and modified slightly. Air Temperature sensor isn't use in my application. instead, the ohms of a wire were changed to "cheat" the ECU of the air Temp sensor being there and there's only 1 reading which is a permanent reading that will never change according to temperature. Plus the air Temperature in Asia don't vary much, so i'm not worried about it.it's quite techincal which i ddin't really get to absorb much. anyway, i gained 5RWHP on top of the 160RWHP i had before MAF which was pretty good. but what's important was the engine response that i'm really happy with. No graphs and charts due to the faulty printer..but there are pics. so enjoy!cheersTom</blockquote>

Verification

The Marketplace Latest

Advan GT Beyond 19 Civic Type R FK8 FL5 Rim Wheel
- Started by aycy
- Chassis and Wheels
TE37 Saga S Plus 18 Civic Type R FL5 FK8
- Started by aycy
- Chassis and Wheels
Perodua Bezza body kit/spoiler
- Started by jeff6126
- Exterior and Body
Honda Jazz FLRS side skirt
- Started by jeff6126
- Exterior and Body
yellowcaliper /caliperspray
- Started by jeff6126
- Exterior and Body
Te37 Track Edition 2 FK8 FL8 Civic Type R Rim Wheel...
- Started by aycy
- Chassis and Wheels
Revozport R35 GT Wing Spoiler and Trunk
- Started by aycy
- Chassis and Wheels
original rare Work Emotion 11R 18x8.5jj offset +47...
- Started by david tao
- Chassis and Wheels
Spoon FK8 FL5 19 inch rim wheel Type R
- Started by aycy
- Chassis and Wheels
Litchfield GTR R35 Road Suspension Kit Absorber
- Started by aycy
- Chassis and Wheels

Posts refresh every 5 minutes

Spark plug for BOT: heatrange change and copper/iridium

Hi folks.
Tried to do some digging (till 2009 dated threads), and did not find any dedicated thread on sparkplug.

I have a boosted D16 with 'T28 .49AR hotside' and stock internals (exception to ACL duraglides and...

King of the Hill - RX-7 Maou

http://image.importtuner.com/f/features/impp_1008_fd3s_mazda_rx_7_re_amemiya/29453932+pheader_460x1000/impp_1008_01_o+fd3s_rx7+front.jpg

FD3S Mazda RX-7 RE-Amemiya - Run With The Devil
You're looking at...

how to install turbo timer?

Any bro noe how to install a turbo timer in saga lmst? the turbo timer come wit

1red wire
1black wire
1blue + green wire (connect together wen i'm get it)
n 2 thick wire wit white n yellow..