Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="mrbear" data-source="post: 1535842" data-attributes="member: 19881">well im bored. off for 3 days. so went to my mech,to repair my VTEC solenoid pressure switch gasket. so now my car no leaking at all.so my cover is a bit dull,very ugly,peel offs chips. so decide to spray.what u/i need to buy for this project?1) paint removal for metal2) small paint brush3) 15vermillion + 33red (spray can code)4) sand paper/scrapper/clotch/newspaperhow it starts!1) remove my H22A cover. http://img257.imageshack.us/img257/6820/111bb6.jpg2) using paint brush,brush all over the cover. n wait for 5-10 minutes. (be extra careful,because the paint remover is an acid,u will shouting if those liquid get in touch with ur skin)http://img180.imageshack.us/img180/606/12yz9.jpg3) brush if off with paint brush n also water.http://img193.imageshack.us/img193/1501/14cd5.jpg4) how it looks like when the original paint is remove. (u need to sand paper for this part for smooth surface)http://img477.imageshack.us/img477/6940/252242gw1.jpg5) undercoat ur cover,with white or silver,very thin layer of spray. let it dryhttp://img193.imageshack.us/img193/3016/23522da7.jpg6) spray it. switch over from 15vermillion to 33red. 2-3 times n spray another cans. spray it slowly. normal spray can technique of spray. left to right,right to left.http://img477.imageshack.us/img477/100/dsc00023sk6.jpg7) the cover when its dry,n ready. (oops sorry,its not yet completed). need to re-paper sand it back. re-sand it till the color bit dull. just to make the paint sticks to the metal valve cover. http://img477.imageshack.us/img477/3329/433473737xt5.jpg* to be continued.on next part. i will re-sand paper it,to make the paint sticks to the metal. then re spray again. n also remove the paint from DOHC VTEC. wait for me!</blockquote>

Verification

The Marketplace Latest

Evasive EVS Tuning Carbon Body Kit Honda Civic Type...
- Started by aycy
- Exterior and Body
Mugen MS-C Full Bucket Seat Civic Type R FL5 FK8
- Started by aycy
- Engine and Performance
Boost Logic Boostlogic Oil Cooler Kit R35 GTR GTR35
- Started by aycy
- Engine and Performance
Linney IHI 800WHP Turbo Kit R35 GTR35 GTR
- Started by aycy
- Engine and Performance
Varis R35 GTR GTR35 Front Bumper
- Started by aycy
- Exterior and Body
HKS Spec R Titanium Exhaust with Y pipe R35 GTR GTR35
- Started by aycy
- Engine and Performance
2016 BMW 120i LCI M Sport F20 1.6 Auto
- Started by aycy
- Cars for sale
GR Yaris H&R Front Rear Anti Roll Bar
- Started by aycy
- Chassis and Wheels
BBS RI-A 10J God Spec FK8 FL5 Honda Civic Type R...
- Started by aycy
- Chassis and Wheels
Rays Gram Lights 57CR GR Yaris Subaru Impreza Rim...
- Started by aycy
- Chassis and Wheels

Posts refresh every 5 minutes

Haltech Platinum Sport 1000

Hello bro's.. Did anybody here experience with Healtech platinum sport 1000? I plan to mobilise it into my car..So which tuner should i go? Any advice from you guys... Please :) And any idea how much it's gonna cost...

Proton Satria Neo S2000 Heads to Finland for Neste Oils Rally!