Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="12savefuel" data-source="post: 1064425734" data-attributes="member: 69762">My Cefiro and 20G emblem was in the wrong position as the previous owner repainted the car and the painter didn't stick it back the right way. Also the adhesive also was coming off as they used poor quality double side foam tape. So since the emblem was coming off might as well do it properly once and for all. Bought 3M Heavy Duty tape (the grey stuff with red plastic film) for rm17.50 from tesco. It was a pain to cut the tape to the correct shape but at the end I manage to do it. Wasn't perfect but good enough.1. To remove the old emblem I just used dental floss, slot it behind the emblem aand the tape nd start cutting the tape with the dental floss. 2. Remove adhesive tape using lighter fluid. I used a plastic scraper to help remove all the adhesive. The blue plastic tool you actually see there is a plastic automotive clip removal tool made by JTC and come in 5 different shapes and sizes. But have to be careful not to scrap too hard and inflict deep marring on the clear coat. 3. With all the adhesive removed, its time to clean the paint and do correction. I used an RB with LC white pad and Osren Crystal Cut 3.0. Took about 3 passes to finish it. Didn't bother to finish with a black pad as the clear is quite hard and couldn't really see any holograms or swirls left by the correction.4. Clean the surface with IPA ready for sticking the emblem.5. Measure up, get your lines straight and stick the emblem and you're done.http://i1110.photobucket.com/albums/h444/jonlsl/Relocate%20Emblem/PA250306Small_zps4810fa7b.jpghttp://i1110.photobucket.com/albums/h444/jonlsl/Relocate%20Emblem/PA250302Small_zps310dce5b.jpgRemoving adhesivehttp://i1110.photobucket.com/albums/h444/jonlsl/Relocate%20Emblem/PA250307Small_zpsf8023c3e.jpgAdhesive removed http://i1110.photobucket.com/albums/h444/jonlsl/Relocate%20Emblem/PA250308Small_zps92e7e30f.jpghttp://i1110.photobucket.com/albums/h444/jonlsl/Relocate%20Emblem/PA250304Small_zps385f5c7c.jpg---------- Post added at 12:19 PM ---------- 6 hour anti-bump limit - Previous post was at 12:19 PM ----------http://i1110.photobucket.com/albums/h444/jonlsl/Relocate%20Emblem/PA250309Small_zps82970ad2.jpgCorrection finishedhttp://i1110.photobucket.com/albums/h444/jonlsl/Relocate%20Emblem/PA250310Small_zpsb332dab3.jpgRelocation complete</blockquote>

Verification

The Marketplace Latest

original rare Rays Volk Racing CE28 17x8jj offset...
- Started by david tao
- Chassis and Wheels
Evasive EVS Tuning Carbon Body Kit Honda Civic Type...
- Started by aycy
- Exterior and Body
Mugen MS-C Full Bucket Seat Civic Type R FL5 FK8
- Started by aycy
- Engine and Performance
Boost Logic Boostlogic Oil Cooler Kit R35 GTR GTR35
- Started by aycy
- Engine and Performance
Linney IHI 800WHP Turbo Kit R35 GTR35 GTR
- Started by aycy
- Engine and Performance
Varis R35 GTR GTR35 Front Bumper
- Started by aycy
- Exterior and Body
HKS Spec R Titanium Exhaust with Y pipe R35 GTR GTR35
- Started by aycy
- Engine and Performance
2016 BMW 120i LCI M Sport F20 1.6 Auto
- Started by aycy
- Cars for sale
GR Yaris H&R Front Rear Anti Roll Bar
- Started by aycy
- Chassis and Wheels
BBS RI-A 10J God Spec FK8 FL5 Honda Civic Type R...
- Started by aycy
- Chassis and Wheels

Posts refresh every 5 minutes

After changing timing belt

Does anyone got this experience after changing timing belt when engine in cold or over night not used when start engine got a weird sound from the timing belt side after a minute driving or engine in high temperature...

Hyundai Genesis Spotted

http://www.blogsmithmedia.com/www.autoblog.com/media/2007/06/genesis_spy_tcb_450.jpg

As much as we enjoy featuring professional spy photog's material, sometimes the real joy comes courtesy of your average Joe. So...

[?] how to remove proton carb? 4g13, ?

hey i was wondering how to remove my carb? wants to do some cleaning..
some picture and instruction wil be appreciated.. thanks