Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="Muhammed" data-source="post: 3842692" data-attributes="member: 80236">Hi GuysHere is some Usefull Info to help you Clarify your Wheel Issue , As your Wheels and Tyres are Essentially the Most Crucial Aspect of your Car , It is Essential to have one that Compliments the Tolerances Laid Down by the ManufacturerThe wheel offset is the distance from the hub mounting surface to the centerline of the wheel. The Offset diagram 1 shows a positive offset in which the mounting surface is outside of the wheel centreline. This suspension/ wheel combination was chosen to maximize performance. You can see that the suspension geometry intersects the centreline at the road surface for optimal handling.If you select an aftermarket wheel with the exact same offset, you will always have the exact same scrub radius. Suspension and handling properties will not change.If the new wheel is wider than the stock wheel, you will loose clearance on both suspension and wheel well sides. There is obviously a limit to how much of a width change you can make.Often a driver will select a wheel with a smaller offset than stock. The attachment Offset diagram Zero Offset shows a zero offset where the mounting surface is equal to the wheel centre. (You could go even farther and select a wheel with a negative offset.) A smaller offset will create a scrub radius which may affect the handling of the car, but there are a number of reasons why you may need to choose a smaller offset.1. To compensate for a wider wheel: A wider wheel with the exact same scrub radius as the stock wheel will be positioned closer to the suspension components. If the wheel is too much wider, it will not fit. To compensate, you would choose a smaller offset to move the wheel away from the suspension.2. To create a wider stance: By setting the wheels outward, the stance of the car becomes wider and stability is increased. In some applications, the benefits of this stability are greater than the drawbacks of the scrub radius change and the driver may make this compromise. 3. Looks: A smaller offset moves the wheels outward, so they have a tendency to fill out the wheel well better. Cars set up for show, more than performance will often choose a lower offset wheel, however, if the offset is too small the sidewall will rub the inside of the fender.Hope This Helps</blockquote>

Verification

The Marketplace Latest

R35 GTR 2020 Original Rim Wheels
- Started by aycy
- Chassis and Wheels
Greddy Trust R35 Y Pipe GTR GTR35 Exhaust Used
- Started by aycy
- Exterior and Body
Nissan Silvia S15 Door Trim Card Panel Bride
- Started by aycy
- Interior and Cockpit
Atlas Force UHP Used Tire Tyre 275 35 20
- Started by aycy
- Chassis and Wheels
R35 GTR Ohlins Adjustable Suspension
- Started by aycy
- Chassis and Wheels
Nismo LMGT4 40th Anniversary 18x9.5+12 White
- Started by aycy
- Chassis and Wheels
Rays G025 18 inch VW Audi S3 A45 CLA45 Golf MK7 MK8 Rim
- Started by aycy
- Chassis and Wheels
S13 S14 S15 Used Drift Rim Tire Set
- Started by aycy
- Chassis and Wheels
R35 Used Titanium Exhaust
- Started by aycy
- Engine and Performance
PWR FL5 / FK8 Street Radiator 42MM
- Started by aycy
- Engine and Performance

Posts refresh every 5 minutes

Learning to set AFC

about setting AFC without dyno

hello.....i want to discuss and your opinion about the setting of Apexi Vafc ...or other still can(motect or...)...better in VTEC ..no matter the car is been modified kao kao or...

L70 turbo kit...

i've just found about L70 turbo kits.i seems its a carburator based turbo.and its REALLY old..!but appareantly it can be bolted on to my factory engine.how far is this true??really would like more details on this...

Mivec Head and TC 4g93P

Hi all,
Anyone has ever fit a MIVEC head on 4g93p with a bolt on turbo and 2mm casket?
Will it work??? or waste of time and money?

and how can i use RSM to control the MIVEC opening, as i have ITC and safc 2 so not...