Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="kennethfong" data-source="post: 2321169" data-attributes="member: 4371">Yo ladies and gentlemen,I'm suffering from clutch slippage now, i need a clutch that can sustain up to 300 HP or even better 400 HP if there's any future mod with only 8.5 inch flywheel + pressure plate + clutch, mainly using my car for working trip and daily drive.... OK now i have few options, let me elaborate below for my solution:1) Get a single plate racing clutch, however i've just been released from hospital 6 weeks ago due to surgery on my left knee and i can't really press the hard clutch....price is around RM 1-1.5k which is affordable....2) Get a twin plate clutch, some branded ones like ACT or Exedy or HKS will do fine and not so hard to press, but the price is really expensive around RM 3-4K....3) Been informed that someone somewhere in this country can modify clutch, you'll just have to send them ur clutch, pressure plate and flywheel, they'll change and upgrade the clutch gripping area to a much powerful ones (dunno whether lorry or bus ones or not), and they'll modify the pressure plate too to suit the clutch they mod, also the flywheel is best we send them coz they might need to skim a lil bit coz the upgrade of clutch is just attaching a better gripping clutch which adds a few milimetre to the thickness.... and if u dun skim it, u dun have free play n can't change gear afterwards.... cost around RM 1-RM 1.5K and somemore can maintain lightweight clutch pressing which is good, the concept behind this is to extract the most help from the clutch plate and not the pressure plate itself, coz normally cheap single plate racing clutch depends on pressure plate to hold the clutch to the tightest strength in order to prevent slippage which makes it a heavy clutch.....4) change to original 9 inch flywheel, MMC 9 inch pressure plate, and 9 inch clutch.... should be able to withstand up to 300HP but still unknown how long it'll last.....cost is somewhere in between around RM 2k + 2.5k, for this i need to remachine a lil bit on the gearbox housing to clear 0.5inch of new flywheels and pressure plates and clutch.....sorry for the long post, so what is the best suggestion, i'm really headache now n i'm jus a poor guy.....</blockquote>

Verification

The Marketplace Latest

Mugen MS-C Full Bucket Seat Civic Type R FL5 FK8
- Started by aycy
- Engine and Performance
Boost Logic Boostlogic Oil Cooler Kit R35 GTR GTR35
- Started by aycy
- Engine and Performance
Linney IHI 800WHP Turbo Kit R35 GTR35 GTR
- Started by aycy
- Engine and Performance
Varis R35 GTR GTR35 Front Bumper
- Started by aycy
- Exterior and Body
HKS Spec R Titanium Exhaust with Y pipe R35 GTR GTR35
- Started by aycy
- Engine and Performance
2016 BMW 120i LCI M Sport F20 1.6 Auto
- Started by aycy
- Cars for sale
GR Yaris H&R Front Rear Anti Roll Bar
- Started by aycy
- Chassis and Wheels
BBS RI-A 10J God Spec FK8 FL5 Honda Civic Type R...
- Started by aycy
- Chassis and Wheels
Rays Gram Lights 57CR GR Yaris Subaru Impreza Rim...
- Started by aycy
- Chassis and Wheels
2019 Toyota FORTUNER 2.4 VRZ 4X4 (A) Diesel
- Started by aycy
- Cars for sale

Posts refresh every 5 minutes

Safc 5 button & campro

hallo guys...juz curious...can safc 5 button be apply to campro ecu/engine???has anyone ever attempt to apply this item to their campro???share some info plz.... :driver:

HKS turbo timer installation

hi.

i just got the HKS turbo timer from halfcut. only the timer without installation manual. i search the net and found this diagram.

http://img36.imageshack.us/img36/6972/wiringdiagram.gif

i found the +ve battery...

2 bar or 3 bar map sensor

Hi

Anyone has 2bar/3bar map sensor? Let me know how much u wanna sell
012-3955420
Thanks

sorry for posting at this site, but desperate already :P