Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="EFN" data-source="post: 252384" data-attributes="member: 1416">Hey Abel,No harm in asking.Performance is quite subjective to how you tune them.I cannot give guarantee any performance increase simply to spice up the item/services that I sell.Well look at it this way. With an adjustable FPR unit, now you can tune your EFi fuelling behavior to a certain degree that it is similiar to tuning a carburetor. As we know for EFi, fuel are almost 100% managed by ECU and most of us don't want to mess with the ECU - so the other way round we can tune Fuel feed is by increasing or decreasing the Fuel Pressure injected. Normally for NA tuning, an increase of 1 to 2 PSI is enough to add grunts to Throttle Response and Acceleration, or if the car is already running rich mixture, leaning it out a bit will do significant difference.Bottomline is, with OEM FPR you don't have the choice to run the Fuel Pressure you want, so make it adjustable so that it can be tuned to suit your need.I can share you my past experience with AFPR. First I will have to know what are the normal OEM Pressure Level for my engine. Then I start with decreasing the pressure and do a test drive for a day or two. Then, if the engine seemed to be having "flat spot" on acceleration, I will bump it up another PSI and test again. i will keep adding pressure by 1 PSI increment until I can almost smell fuel from the exhaust. So start decreasing the pressure again to get the best setup between the ones that have been done before. Remember, more fuel does not necessarily means more power - in fact an overly rich mixture will make RPM slow and flat spot at high RPM. Finally memorizing all the setup that I have done before, I went for Dyno reading to see if my "feel" tuning is correct. From Dyno results I know now at which PSI is the optimum range for my car. Without A-FPR, all this is not possible.TQ for reading.</blockquote>

Verification

The Marketplace Latest

original rare Rays Volk Racing CE28 17x8jj offset...
- Started by david tao
- Chassis and Wheels
Evasive EVS Tuning Carbon Body Kit Honda Civic Type...
- Started by aycy
- Exterior and Body
Mugen MS-C Full Bucket Seat Civic Type R FL5 FK8
- Started by aycy
- Engine and Performance
Boost Logic Boostlogic Oil Cooler Kit R35 GTR GTR35
- Started by aycy
- Engine and Performance
Linney IHI 800WHP Turbo Kit R35 GTR35 GTR
- Started by aycy
- Engine and Performance
Varis R35 GTR GTR35 Front Bumper
- Started by aycy
- Exterior and Body
HKS Spec R Titanium Exhaust with Y pipe R35 GTR GTR35
- Started by aycy
- Engine and Performance
2016 BMW 120i LCI M Sport F20 1.6 Auto
- Started by aycy
- Cars for sale
GR Yaris H&R Front Rear Anti Roll Bar
- Started by aycy
- Chassis and Wheels
BBS RI-A 10J God Spec FK8 FL5 Honda Civic Type R...
- Started by aycy
- Chassis and Wheels

Posts refresh every 5 minutes

2011 Bangkok Motorshow Coverage + Thai Spices

The on-going 2011 Bangkok Motorshow continues to wow show-goers with ever improving quality of attractions be it cars, show...

Porsche greenlights mini Cajun crossover-coupe

https://www.zerotohundred.com/wp-content/uploads/2011/03/porsche1-600x450.jpg

The top brass at Porsche have given the go-ahead for production of the company’s mini crossover coupe, currently dubbed the Cajun, that...

Question on Evo6 & 7,8,9

Just wondering absorber evo7 can fit into evo 6????
any sifu???