Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="Rleo6965" data-source="post: 1064238960" data-attributes="member: 135626">I'm glad to see your post. You might help me solve also my problem that puzzling me.But first. I will try to help you.I think those 3 green stripe wire was from the Throttle Position Sensor of the carburator. This must be connected to the ECM ( computer ). Upon starting engine ECM will not control the engine ( open loop mode ) when engine was cold. This was the reason that engine run have no problem. But when the engine reached the normal engine temperature. ECM will take over to control the engine ( close loop mode ). Since the 3 wire from Throttle Position Sensor from the carburator was not connect to the ECM. Engine control was erratic.Shown below picture of carb and connection diagram of TPS wire. I hope its correct. You can ask your mechanic to confirm these. Colored circle in the schematic diagram designates the stripe color on green wire. Except for yellow color that should be your white stripe wire.I have this mikuni electronic controlled 2 barrel carburator and not able to install in my 4G13 engine. Because I don't have the ECM or Electronic Control Module or ( computer box ). May I know the the model number of your ECM? If possible. Can you show picture of the board inside the "metal box" and the model number pasted on casing. A friend of mine willing to swap his ECM for my stock 4G15 cylinder block. I just want to know if its the same with your ECM.Can you show close up picture of the small white board standing in the middle of the board. My friends ECM white standing board small square components have have "no cover". I don't know if IC was burned or defective. or it's normal. Any guys, know the function of this small board?Thanks . Hope I able to help you. And later you also help me.<img src="https://zerotohundred.com/forums/styles/default/xenforo/smilies/biggrin.gif"  class="smilie" loading="lazy" alt=":biggrin:" title="Biggrin    :biggrin:" data-shortname=":biggrin:" /></blockquote>

Verification

The Marketplace Latest

Mugen MS-C Full Bucket Seat Civic Type R FL5 FK8
- Started by aycy
- Engine and Performance
Boost Logic Boostlogic Oil Cooler Kit R35 GTR GTR35
- Started by aycy
- Engine and Performance
Linney IHI 800WHP Turbo Kit R35 GTR35 GTR
- Started by aycy
- Engine and Performance
Varis R35 GTR GTR35 Front Bumper
- Started by aycy
- Exterior and Body
HKS Spec R Titanium Exhaust with Y pipe R35 GTR GTR35
- Started by aycy
- Engine and Performance
2016 BMW 120i LCI M Sport F20 1.6 Auto
- Started by aycy
- Cars for sale
GR Yaris H&R Front Rear Anti Roll Bar
- Started by aycy
- Chassis and Wheels
BBS RI-A 10J God Spec FK8 FL5 Honda Civic Type R...
- Started by aycy
- Chassis and Wheels
Rays Gram Lights 57CR GR Yaris Subaru Impreza Rim...
- Started by aycy
- Chassis and Wheels
2019 Toyota FORTUNER 2.4 VRZ 4X4 (A) Diesel
- Started by aycy
- Cars for sale

Posts refresh every 5 minutes

Top Gear : Pagani Zonda R

https://www.zerotohundred.com/wp-content/uploads/2011/06/paganizondar.jpg

Jeremy is on the test track in the insanely powerful Pagani Zonda R, before the Stig tests its lap speed. This is one of the most powerful...

Malaysia Skyline Club Genting Escapade Video

Sorry for the late post.. was soo busy with work and all.. this is fully for u skyline boys.. have fun =)

Enjoy

r33 ori absorber can fit r32 hcr??? where to find gud price adjustable r32???

does it fit? on my r32 hcr? i mean r33 original absorbers, as i c all 4 absorbers uses all bushes fittin on da bottom rack.

can someone advice or has previous experience?

also do u noe where can source r32...