Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="ace79" data-source="post: 2053357" data-attributes="member: 4828">Hah, thought about kacau a bit, too late, Chris2000 oledi done it.The Prelude / CTR / ITR front brake setup mod is very popular with SG's EGs and EKs. If someone, or some shop sezs no need to machine the Prelude / CTR / ITR front caliper's bracket to fit your EGs / EKs, only using some washers.....eeekkkk! Can be done, but seriously, it's not that safe, and machining about 5mm off from the caliper bracket is seriously less than RM 100 per set of two, and safer too. And yeah, the discs hafta be redrilled to PCD 100. Chris2000 got lobang for a good, trusted machining shop for this work. Also, better skim the discs at the same time, and better yet, put about 6 - 8 grooves per disc, this helps in cleaning up the pad a wee bit, and look damn cool too. Make sure the grooving work is only about 1/2 inch deep ( or so, I forgot ), and length of grooving must keep a minimum of 1 inch clearance on both grooving ends, please dont groove all the way to the outer and inner part of the braking area.I've wanted to do this for sooooo long oeldi ( since 8 months ago ) but as always, car mod fund is always running short. Sheeesh!To make the mod even better, upgrade to Goodridge's SS brake hoses ( oso from Chris2000! ), pads to EBC Yellowstuff or Redstuff. To maximise the potential of your brake mod even more, change the master cylinder to Prelude or Accord's ( I think it's the biggest you can find, and is fitted without major mods, only have to realign the steel brake pipe ), and please use a minimum of dual layer brake pump too. Only slight understeer ( due to bigger discs ), but damn cool to see the caliper and disk filling up your 15's. And the braking powah, fuh! At least 20 - 30% better than standard and costing you way less than one piece ( yes, one piece ) of Spoon's 4 pots.</blockquote>

Verification

The Marketplace Latest

Mugen MS-C Full Bucket Seat Civic Type R FL5 FK8
- Started by aycy
- Engine and Performance
Boost Logic Boostlogic Oil Cooler Kit R35 GTR GTR35
- Started by aycy
- Engine and Performance
Linney IHI 800WHP Turbo Kit R35 GTR35 GTR
- Started by aycy
- Engine and Performance
Varis R35 GTR GTR35 Front Bumper
- Started by aycy
- Exterior and Body
HKS Spec R Titanium Exhaust with Y pipe R35 GTR GTR35
- Started by aycy
- Engine and Performance
2016 BMW 120i LCI M Sport F20 1.6 Auto
- Started by aycy
- Cars for sale
GR Yaris H&R Front Rear Anti Roll Bar
- Started by aycy
- Chassis and Wheels
BBS RI-A 10J God Spec FK8 FL5 Honda Civic Type R...
- Started by aycy
- Chassis and Wheels
Rays Gram Lights 57CR GR Yaris Subaru Impreza Rim...
- Started by aycy
- Chassis and Wheels
2019 Toyota FORTUNER 2.4 VRZ 4X4 (A) Diesel
- Started by aycy
- Cars for sale

Posts refresh every 5 minutes

The Return of Vintage Autos

How many of you are die-hard fans of classic cars? It's probably safe to say that millions of people...

How much to powdercoat alloy wheels?

Hello bosses and taikors, anyone know how much does it cost to powdercoat alloy wheels 17x9in?

Do you know any good shops that does this?

Mucho gracias amigos.

Hi all...sory for opening thread with this title....i hope by opening this thread...we can share info about place to go n buy stuff for z33...with reasonable price...

at this moment....i'm looking for place to buy...