Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="alvin24" data-source="post: 347236" data-attributes="member: 63">4G91 has 115hp on engine... 4G15 has around 80 on engine... u do the math. =ÞI think the stock pipings are enuff lar if u aren't planning to mod till to extreeme... else go for 1.8 inch internal diameter... should suit 4G91 perfectly. 2" could be too big... will make the car a bit sluggish.</blockquote>

Verification

The Marketplace Latest

~accident repair ~touch up paint
- Started by jeff6126
- Exterior and Body
Universal front bonnet scoop
- Started by jeff6126
- Exterior and Body
Mitsubishi Lancer/inspira Evo front bonnet hood
- Started by jeff6126
- Exterior and Body
Honda civic fc gtwing spoiler
- Started by jeff6126
- Exterior and Body
Mitsubishi Lancer ~Evo front bumper
- Started by jeff6126
- Exterior and Body
accident repair spray painting color
- Started by jeff6126
- Exterior and Body
Subaru Impreza GC8
- Started by aycy
- Cars for sale
R35 GTR 2020 Original Rim Wheels
- Started by aycy
- Chassis and Wheels
Greddy Trust R35 Y Pipe GTR GTR35 Exhaust Used
- Started by aycy
- Exterior and Body
Nissan Silvia S15 Door Trim Card Panel Bride
- Started by aycy
- Interior and Cockpit

Posts refresh every 5 minutes

Door trim vibration

I just install the alpine speaker which is mounted to the door trim. The door trim now vibrate when medium bass kick in.

What is the best solution to reduce the vibration?

exhaust pipe diameter....?

can anyone suggest to me the diameter of the exhaust pipe as i'm gonna make pipe for my project...the pipe will follow the ori evo123 route bcoz sometime i need to drive it to kl for tuning,the car setup is for...

RS 200 with 1jz engine swap

i have heard so many people stated that to swap a 1jz into a rs200 we dont have to change or modify the existing engine mounting. However some also say that you have to modify it. Can anybody shed some light to this...