Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="epj7900" data-source="post: 607180" data-attributes="member: 13524">JinKL,Thanks for the opinion. I shall use the Nitto until it kaputs. I can get the thermal wrap pretty cheap because where I work there are Heat Treatment Machines and they use these wraps for their pipes. I can get the cloth type 20meters for RM 60 and the fiber type for RM 120 - may be a little lesser for 20 meters. It's exactly the same as the SARD one - which is like RM 100 for just a little. I also can get the 1 inch type. I'll get that and wrap the manifold - I've seen a GTI in Terato with the wrap done - looks very decent. Yes agree with you - the SS Racing one is a little expensive. As I know the stainless steel manifold with wastegate outlet is about RM 900 - I got the quote from Pitworks at JB (Kevin). It's from Thailand I know. Jin - Anywhere I can get gauges at a good deal. I want the memory type - Most important is Ext Temp - because I already have a Blitz Illumini Boost Gauge. The new Blitz Stepping Motor - Black Colour can get for RM 2100 for 3 pcs with control unit. I collect my crank shaft n conrods soon - then will build back my engine. Seems like I am unable to get the bearing - King Bearing is like freaking RM 750 - no way I am going for that. I am not able to get hold of the Clevite in Malaysia. I am going to confirm back on the shipping charges from States. I have a friend there - may be ask him to purchase it and then pass mail it to me. Bearing should not be very heavy or big right ? besides Koyo, NTN n all... what other good bearings are there?Thanks bro.... will update you guys from time to time. Keep me in the loop - if you guys have any gatherings - I have 7 cars with me - Group - We established ourselves as Ruff Ryders - and we do our cars at our own WS at Kulai, JB - Ruff Gears Enterprise. We are located very close to Bibir Design and AL Motorsports. We have 3 - Evo 3, 1 - Evo 2, 1 - GSR, 1 - H22 Accord, 1 - Eterna and 1 - EG - B16A. Our friends from KL are also pretty much in to the car scene - Antera Motorsports. They have gone in to Autosaloon but we guys prefer performance. They do their airbrush work at Nitro Design.</blockquote>

Verification

The Marketplace Latest

R35 GTR 2020 Original Rim Wheels
- Started by aycy
- Chassis and Wheels
Greddy Trust R35 Y Pipe GTR GTR35 Exhaust Used
- Started by aycy
- Exterior and Body
Nissan Silvia S15 Door Trim Card Panel Bride
- Started by aycy
- Interior and Cockpit
Atlas Force UHP Used Tire Tyre 275 35 20
- Started by aycy
- Chassis and Wheels
R35 GTR Ohlins Adjustable Suspension
- Started by aycy
- Chassis and Wheels
Nismo LMGT4 40th Anniversary 18x9.5+12 White
- Started by aycy
- Chassis and Wheels
Rays G025 18 inch VW Audi S3 A45 CLA45 Golf MK7 MK8 Rim
- Started by aycy
- Chassis and Wheels
S13 S14 S15 Used Drift Rim Tire Set
- Started by aycy
- Chassis and Wheels
R35 Used Titanium Exhaust
- Started by aycy
- Engine and Performance
PWR FL5 / FK8 Street Radiator 42MM
- Started by aycy
- Engine and Performance

Posts refresh every 5 minutes

Advise on buying suspension

Hi guys, may i know what are the choices available for our Tezza if i were to change my suspension since the current one is dying.

TEIN fully adjustable - RM 3600^ i think
GAB SS fully adjustable - RM 3000

I am...

Design students splash their creativity on the New Toyota Vios

Campaign looks for most creative expression of the “My Design. My Pride” theme to celebrate the upcoming launch of the all-new Toyota Vios...

Who can i trust to Tune Power FC

Hi all,

Need some input on possible garages that can manage the tuning of power fc with wideband. Besides Speed D, N1 where else can i go? Thank you im advance.

Regards,

Dev