Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="synchron" data-source="post: 554504" data-attributes="member: 115">Dont think the adapter will be RM 400.00. If you were thinking of getting a single adapter the price will be atleast RM 1000.00. I have been explaining on the type of adapter available in the market.There is 3 type of 4 throttle adapter. First one is grinding out from a billet alluminium which is the most recommended one and also it looks the best. They are the most expensive way.The billet ones will cost about about RM 1000.Second type is by doing one piece thin of manifold adapter and another thin piece of 4 throttle adapter. Then join them together by welding them. Much cheaper concept but looks messy because of the welding line.The welded ones will cost about RM 800 or so, never try before but i dont really recommend it because it will have some side effect after using a while. 6061 and 7075 cannot be expose to direct heat like welding and melting. The alluminium composite will change, for example: alluminium adapter which went through welding process need skimming because the adapter composite has been change and uneven. The welded join place will become software, after using for sometime it will start cracking. Third one is by casting. The cheapest way by quantity,quality will be like original manifold.The third one is the cheapest one. Most probably less than RM 500 but need to have a huge quantities. Need to pay for the tooling cost which is the mold cost. In order to get to that price, i think you will get about 50 pieces.The cheapest standalone ecu will be from Ipoh, Mr. Leow. I think he is selling at RM1500.00.</blockquote>

Verification

The Marketplace Latest

Perodua Bezza body kit/spoiler
- Started by jeff6126
- Exterior and Body
Honda Jazz FLRS side skirt
- Started by jeff6126
- Exterior and Body
yellowcaliper /caliperspray
- Started by jeff6126
- Exterior and Body
Te37 Track Edition 2 FK8 FL8 Civic Type R Rim Wheel...
- Started by aycy
- Chassis and Wheels
Revozport R35 GT Wing Spoiler and Trunk
- Started by aycy
- Chassis and Wheels
original rare Work Emotion 11R 18x8.5jj offset +47...
- Started by david tao
- Chassis and Wheels
Spoon FK8 FL5 19 inch rim wheel Type R
- Started by aycy
- Chassis and Wheels
Litchfield GTR R35 Road Suspension Kit Absorber
- Started by aycy
- Chassis and Wheels
original rare Yokohama ADVAN Racing RG3 18x8.5jj...
- Started by david tao
- Chassis and Wheels
~accident repair ~touch up paint
- Started by jeff6126
- Exterior and Body

Posts refresh every 5 minutes

Potenza RE003

Guys wanna ask about RE003 tread, is it asymmetric or symmetric?? The tyre can only rotate front and back or it can rotate left and right??

Final fifth generation BMW 3-series rolls out from Kulim

https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/s720x720/431221_584590985660_283900550_2295397_1735350295_n.jpg

BMW Group Malaysia has sold 10,473 units of the E9x 3-series in Malaysia. From that figure, 8,930...

how to spray my engine cover?

gonna use wat type of spray to color my hear cover?wat should i mention during those process?got the word on top,how to prevent to spray on it?