Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="fastclubman" data-source="post: 1063942081" data-attributes="member: 7030">i have been using the ITB setup on my 4g93 wout mivec for a couple of years now and it has been performing flawlessly. sizing of the bodies and the overall length of the bodies + manifold+ trumpet is important to achieve power to be produced at the desired rev range. And this can be altered to suit your requirement, i.e if you want stronger mid range, or top end for example, by simply varying the induction length. Also the exhaust header setup is important, I have to date dyno tested about 4 different header on my car and with varying results. The power curve is important to determine the gearing setup, as you would always want each gear to fall right in the powerband when shifting up and this cannot be done simply by just altering the final drive. Perhaps if you have a very flat torque curve and linear pull thru your rev range, then this problem can be masked, but generally this is not the case.also i would avoid stock rods for 9k rpm application, or at least you should have some arp rod bolts, to prevent rod stretch which results in spun bearing. i know some still use still stock rods, but if reliability and durability of the engine is important then its a point worth considering.</blockquote>

Verification

The Marketplace Latest

original rare Rays Volk Racing CE28 17x8jj offset...
- Started by david tao
- Chassis and Wheels
Evasive EVS Tuning Carbon Body Kit Honda Civic Type...
- Started by aycy
- Exterior and Body
Mugen MS-C Full Bucket Seat Civic Type R FL5 FK8
- Started by aycy
- Engine and Performance
Boost Logic Boostlogic Oil Cooler Kit R35 GTR GTR35
- Started by aycy
- Engine and Performance
Linney IHI 800WHP Turbo Kit R35 GTR35 GTR
- Started by aycy
- Engine and Performance
Varis R35 GTR GTR35 Front Bumper
- Started by aycy
- Exterior and Body
HKS Spec R Titanium Exhaust with Y pipe R35 GTR GTR35
- Started by aycy
- Engine and Performance
2016 BMW 120i LCI M Sport F20 1.6 Auto
- Started by aycy
- Cars for sale
GR Yaris H&R Front Rear Anti Roll Bar
- Started by aycy
- Chassis and Wheels
BBS RI-A 10J God Spec FK8 FL5 Honda Civic Type R...
- Started by aycy
- Chassis and Wheels

Posts refresh every 5 minutes

Haltech sprint 500 tuning charges..

Next weeks my car will be out from workshop after a while being there.Installed new engine + haltech 500. I surveyed a few ppl about the tuning charges for haltech sprint 500. Since im new in this field, those who...

Mazda 808, mk 5 13bT 4 sale

Mazda 808,
with road tax and passed JPJ inspection
engine inspection also done

13b Turbo from mk 5 standard
3 inch stainless steel system
LSD( not welded...its a proper LSD from SA22)
16 inch tyres, rear suspension...

GTR 33 for sale??

hey, there is a GTR33 for sale around 140k+ in sunway area.... any of you guys heard about this/interested??